Professional pigeon spikes from KADAX, which allow you to protect areas from the presence of both large and small birds, prevent birds from roosting, landing, and nesting in wide areas such as window sills, railings, roof edges, and awnings. The wires effectively deter birds and prevent their droppings from leaving on living areas. Wide bird spikes allow you to secure surfaces and constantly deter pigeons, sparrows, crows, magpies, and starlings. This prevents birds from flying near your windows or balconies, building nests, and bringing in dirt. The spikes help keep windowsills, air conditioners, and cornices clean. They also protect you from bird-borne diseases and germs. This product is an excellent solution for those living near forests or fields. This product helps control the overabundance of birds flying near your home. The wide spacing of the wires prevents birds from roosting between the spikes. Made of high-quality stainless steel, the wire tips are specially blunted to prevent harm to birds. The base of the spikes is made of polycarbonate, resistant to changing weather conditions and long-term UV radiation. The spikes consist of 78 spring wires per meter. The innovative design of four alternating rows of spikes allows for effective protection of up to 250 mm of surface area. For ease of installation in problematic areas, individual bird spike modules are 335 mm long. The spike height is 105 mm. The wires are attached using a special silicone adhesive or screws. This is a natural choice for every professional. Made of stainless steel, the spikes are resistant to abrasion, impact, and weather conditions – they do not release toxic compounds at high temperatures, and do not crack or degrade at low temperatures. The material is corrosion-resistant, so the wires can be safely installed outdoors. The spikes are attached using silicone adhesive or screws. To properly install bird spikes, you'll need a few essential tools, the most important of which are a silicone adhesive dispenser, a utility knife (or other), a putty knife, a wire brush, and a cloth. Recommended personal protective equipment: safety gloves, safety glasses. Before installing the spikes, thoroughly clean the surface using a wire brush, putty knife, or cloth. Wipe metal surfaces (unpainted or coated) with a degreasing agent, such as methylated spirits. Prime concrete surfaces if necessary. Spread a layer of adhesive—approximately 5 mm—on the base of the spikes using a silicone gun. For wooden surfaces, attach the spikes using screws or corrugated nails. The spike bases are notched approximately every 50 mm, so the modules can be divided into smaller sections if necessary. Carefully place the spikes on the surface. Leave a 2-5 mm gap between the bases of each module being glued. Press the spikes down with your hand or a spatula. The spikes should be installed on a completely dry surface. The minimum installation temperature is 5°C. To avoid stresses in the base, the spike modules should be divided into smaller pieces. The polycarbonate base of the spikes has characteristic notches spaced approximately 50 mm apart. These notches allow the base to be broken and divided into shorter sections, which can be installed on round or semi-circular surfaces, arches, roof tiles, ridge tiles, parapets, and other architectural elements. The bird spikes can be installed on narrow architectural elements such as railings, balustrades, handrails, and downpipe elbows. We recommend installation using adhesive and stainless steel clamps. When installing the spikes on wood, we recommend using stainless steel screws or corrugated nails. The polycarbonate base of the spikes has holes that allow for this type of installation (every 50 mm).