Battery level indicator:Red indicator light:30% power;Green indicator light 1 is on:60% power;Green indicator light 2 is on:100% power;During charging, the corresponding indicator light flashes. After the battery is fully , all three indicators are always on.When the battery voltage is lower than 3V, the battery will be with a small current and the red indicator light will When the battery voltage is lower than 3V, it needs to be recharged.product does not work when charging Work indicator: 1.During operation, when the soldering iron tip is short-circuited or there is no output, the red indicator light will flash. 2.Heating process: First, after 12 seconds, the red light is on, the red light is off, and the green light is on, the user can operate. 3.It will stop working when the voltage is lower than 2.8V.4. When there is no operation, the self-discharge is lower than 25uA. Touch reset function: Press the power button six times continuously, the green light of the work indicator flashes, and the reset of the touch function is completed. Touch reset is a function to readjust the environment when the touch fails due to external interference (when touching to open or reset, do not put your finger on the touch button, otherwise it will not work) Turn off the touch function:Press the power button 8 times in succession. When the indicator light on the work indicator is red, the touch function will be turned off. Power on, press and hold the power button for 3 seconds to turn on the power indicator.Turn off the power, press and hold the power button for 0.3 seconds to turn off the power indicator.When not in use, the lithium battery will automatically turn off after 120 seconds. The touch function needs to be activated for the first time. Press the power button 3 times continuously, the work indicator flashes red, and the touch function is turned on. Before cleaning, please disconnect the device.Clean the equipment with a dry cloth.If you ' want to use this equipment for a period of time, please store it in a dry and ventilated place. Model number:LD006A Temperature range:200-520 degree Heating time:7 seconds Power:11W Maximum continuous working time:1 hours Lithium battery:3.7V 2500 mAH Power equipment:5V Charging limit current 1.6A When the charging voltage is higher than 6V, it will stop charging, and the power indicator flashes red. Warning When not using this tool, it must be placed on a shelf. Children are not allowed to play with this product, and children are not allowed to perform cleaning and user maintenance without supervision. Before charging, the product must be cooled down. Do not expose the battery to strong sunlight for a long time, and do not place it on the heater,otherwise the heat will damage the battery and cause it to explode Before charging, please check whether the output of the charging adapter is 5-6V and the current capacity is not less than 1.6A.It is estimated that charging takes about 1.5 to 2 hours. Before scrapping, you must remove the battery from the device;how to remove the battery: Unscrew the 5 screws on the shell, then open the shell and unplug the battery connector. Colour:Black & Red Material:plastic Package Contents: 1 * Soldering iron 1 * Soldering iron tip 2 * Solder wire 1 * Sponge 1 * bracket 1 * USB charging cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.