1This active equalizer can be applied in ternary lithium battery, lithium iron phosphate battery, and LTO battery. 2Adopting ultra low internal resistance MOS and premium Printed Circuit Board to ensure efficient balance effect. 3The working voltage is 1.8V to 4.2V, and the balance current is 0 to 5.5A, the better the balance, the smaller the balance current 4When the voltage is lower than 3.0V, it will automatically stop and enter the dormant state, and the standby power consumption is less than 0.1mA. 5The transfer is carried out by means of the internal energy transfer of the battery and the balance of the entire battery pack, and no external power supply is required.Item Type: Battery Active Equalizer Material: Printed Circuit Board Function: Suitable for NCM battery, LFP battery, LTO battery. Sleep Current: Parameter Model 6S 7S 8S Applicable Serial Number 5/6s 6/7s 7/8s Applicable Battery Type NCM/LFP/LPO Single Voltage Working Range NCM/LFP: 3.0-4.2V LTO:1.8-3.0V Voltage Balance Accuracy 5mv(typical) Balance Mode The entire battery participates in the active balance of energy transfer at the same time. Undervoltage Protection Sleep Voltage NCM/LFP: 3.0V LTO1.8V Quiescent Working Current 9mA 9mA 9mA1 x Battery Active Equalizer 1 x Connecting Cable The quiescent current is about 9 mA, and it is recommended to be used for batteries with a battery capacity of 60300 AH.