Creality K2 高速3D打印机 CFS多色料盒组合套装(欧规) K2 Series Highlights 1.The comboversion comeswith one CFS unit.Addlitional CFS units sold separately. 2. Only K2 Pro and K2 Plus are assembled with all-metal frame parts. 3.K2Plusfeaturesfivestep-servomotors—four for theXYZaxes and one for the extruder.K2and K2Pro include two for theXY axes and one for the extruder 4. The typical printing speed for al K2 models is 300 mm/s. K2 and K2 Pro have a maximum acceleration of 20,000 mm/s2, K2 Plus accelerates at a maximum of 30,000 mm/s2. Hyper Series filaments are recommended for high-speed printing 5.Flowrate tested using ABS with the nozzle temperature set to 280 °℃. 6.Printing with ABS, ASA, and PPS requires a chamber temperature of 60°℃.PAHT-CF requires 50 °℃ 7. K2 Plus has two auxiliary part cooling fans, while K2 and K2 Pro include one 8.ThenozzleAl camera is available only onK2Pro andK2Plusmodels 9. K2 Plus features dual air filters, while K2 and K2 Pro include one. Built-in RFID reader is only available on K2 Pro and K2 Plus models. Auto filament identification requires Creality RFiD filaments. K2 Pro and K2 Plus support Ethernet connectivity. Only K2 Plus supports dual-band Wi-Fi. K2 Pro and K2 Plus are equipped with 32 GB of ROM, while K2 includes 8 GB. Key Features: Multicolor 3D Printing: 4 × CFS for up to 16 colors Active Chamber Heating: Tackle performance filaments like ABS and PPA-CF Dual AI Cameras: Auto-adjust flow rate and alert you to failures Smart Auto Leveling: Faster leveling of only the target print area Pro-Level 300 mm Volume: Producing larger or more models in one print