FASTER SAMPLING SPEED - 2.5Msps high-speed A/D data collecting, high sampling rate and high bandwidth, one-key transform to waveform function furing measuring.3 waveform scanning modes: automatic/conventional/single. Improve work efficiency.MORE POWERFUL DETECTION RANGE -DC voltage 0 ~ 1000V, AC voltage 0 ~ 750V, DC/AC Current 0 ~ 10A, Resistance 0 ~ 40M, Capacitance 0 ~ 100f, Frequency 0 ~ 5MHZ, Diode / Continuity open circuit voltage 1.5V, judgement resistance 50. Transistor amplification test to meet all test requirements.MORE ACCURACY -Dedicated Chip, the automatic waveform capture function, easy operation. The software calibration technology, memory calibration coefficients. Measure more accurately. To enable Quiet Mode (disable keypress beeps), press and hold the "F4" button and then rotate the rotary knob to turn on the instrument.LED BACKLIGHT & STORAGE / READOUT - Analog broadband range up to: D AC ~ 1MHz, Display hold, storage / readout up to 10 waveforms and 100 sets of measurement values. 240X320 color screen with LED backlighting. More clear and suitable for working at night.OVERLOAD PROTECTION & MULTI-PURPOSE - Built-in 500mA/10A double protective tube, dual protection of the instrument. Can choose to automatically shutdown or continuous operation, applicable to the workplace such as family, school, and factory. DISTORTION DETECTION ALSO Protect safety.Declaration: 2 in 1 Handheld Oscilloscope Multimeter oscilloscope multimeter does not have FFT function.Colour: Blackmaterial: plasticDisplay 240 x 320 Color ScreenBacklight Constantly onPower Supply 3 x AA batteriesWorking Current About 65mAUse Time More than 10 HoursUse Temperature 0C~+40C ; Less than 75%RHDimensions 83 x 160 x 32 (mm)Observation Area 49.0 mm x 36.7 mmInput Resistance About 10M Auto Shutdown 15 Minutes or DisabledSleep Current About 35uAStorage Capacity 100 x Data , 10 x WaveformStorage Temperature -10C ~ +60C ; Less than 90%RHWeight About 180gOscilloscope CharacteristicsAnalog Bandwidth 1MHz (Only for oscilloscopes with ACV)Channel 1Vertical Sensitivity Range 300mV ~ 100V per gridVertical Amplitude Accuracy (5%+ 0.2div)Scan Mode Auto / Normal / SingleAuto Configuration Auto Set Time Base and Vertical AmplitudeMax Real-Time Sampling Rate 2.5MspsInput Resistance About 10MTime Base Range 2.5us ~ 10s per gridTime Base Accuracy (0.01% + 0.1div)Trigger Edge Selection Rising / Falling Automatic Measurement Function -p, Vavg, Vrms, HZPackage Contents:1 x Oscilloscope Multimeter2 x Test LeadsOnly the above package content, other products are not included.Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.