Enhance your marine navigation and data communication with this advanced NMEA0183 to N2K Gateway Converter, designed for seamless integration and reliable performance. This plug-and-play device supports automatic baud rate detection and firmware upgrades via supplied PC software, ensuring easy setup and future-proof operation. Powered directly from the N2K network with no external power supply needed, it efficiently converts NMEA 0183 sentences to N2K PGNs and vice versa, providing comprehensive protocol compatibility for your onboard electronics. Key Features: · Plug and Play Installation: Easy to install and use, allowing quick integration into existing marine electronic systems without complex wiring. · Overvoltage and Reverse Polarity Protection: Built-in safeguards protect the device from power surges, transient voltages, and accidental reverse polarity connections for enhanced durability. · Firmware Upgrade & Baudrate Configuration: Supports firmware updates and configurable NMEA0183 output baud rate via included PC software, ensuring adaptability to evolving system requirements. · Auto Detection of NMEA0183 Baudrate: Automatically detects input baud rate up to 38400 bps, simplifying setup and ensuring accurate data communication. · Dual Protocol Conversion: Converts NMEA 0183 sentences to NMEA 2000 PGNs and NMEA 2000 PGNs back to NMEA 0183 sentences, enabling seamless interoperability between different marine devices. · Supports Fuel Flow Sensor: Compatible with fuel flow sensors, expanding its application in monitoring and vessel management systems. · Electrical Opto-Isolation on N2K CAN Bus: Ensures noise immunity and reliable data transmission on the NMEA 2000 network. · Robust Connectivity: Features an M12 male connector with a 1.2-meter cable for secure and flexible installation. · Comprehensive PGN and Sentence Support: Supports a wide range of NMEA 2000 PGNs and NMEA0183 sentences, covering critical navigation and sensor data for versatile marine applications. · Built-in WiFi Hotspot: Provides wireless connectivity with default hotspot mode, allowing easy access to device settings and data via WiFi using the default username and password. · Wide Operating Conditions: Designed to operate reliably in harsh marine environments with a temperature range of -20℃ to +55℃, 93% humidity tolerance, and IPX67 waterproof rating. Specifications: Power Supply (N2K Port): - Voltage: 9~30V DC - Current Drain: 50mA at 12V DC - Protection: Overvoltage, power transient, and reverse polarity protection N2K Port (IEC61162-3): - Supported PGNs include 126992, 127237, 127245, 127250, 127251, 127258, 127488, 128267, 128275, 129025, 129026, 129029, 129033, 129038, 129039, 129040, 129041, 129044, 129283, 129284, 129291, 129539, 129540, 129793, 129794, 129795, 129797, 129798, 129801, 129802, 129809, 129810, 129811, 129812, 130306, 130310, 130311, 130312 - Electrical: Opto-isolated CAN bus - Connector: M12 male - Cable Length: 1.2 meters - Factory Default: All supported PGNs enabled NMEA0183 Port (IEC61162-1): - Supported Sentences: AAM, AMB, APB, BBM, BWC, DBT, DPT, DSC, DSE, GGA, GLL, GSA, GST, GSV, HDG, HDM, HDT, HSC, MDA, MTW, MWD, MWV, RMB, RMC, ROT, RPM, RSA, VBW, VDM, VDO, VDR, VHW, VLW, VTG, VWR, XTE, XDR, ZDA - Electrical: RS422 output and input - Baudrate: Input auto-detect up to 38400 bps; output configurable (factory default 38400 bps) - Factory Default: All supported sentences enabled WiFi: - Mode: Hotspot (default) or WiFi terminal - Default Username: KC2W_ESP32_xxxxxxxx - Default Password: 12345678 - IP Address: 192.168.4.1 - Ports: 10110 (NMEA0183), 10111 (NMEA2000) Environmental Conditions: - Operating Temperature: -20℃ to +55℃ - Humidity: 93% ±3% at 40℃ - Waterproof Rating: IPX67 This NMEA0183 to N