The moisture meter can quickly measure the moisture content of the grain. 1. Compatible with Serial ATA 3.0 specification, backward compatible with SATA2.0 SATA1.0; Compatible with PCI-Express v2.0, backward compatible with PCI-Express v1.0. 2. Supports communication speeds of 6,0 gb/s, 3,0 gb/s and 1,5 gb/s; supports Gen 1i, Gen 1x, Gen 2i, Gen 2m, Gen 2x and Gen 3i. 3. It supports AHCI1.0 mode and native command queue (NCQ), FIS based on port multiplier switch or switching commands and connecting during operation. 4. Compatible with SATA6G, 3G and 1.5G hard drives. 5. User with SATA3.0 data cable for best results. . Card PCI EXPRESS Adapter Board for SATA 3.0 . Card PCI EXPRESS Adapter Board for SATA 3.0 Specification: Item Type: PCI-E to SATA 3.0 Card Model: PCE8SAT-A01 Master: fits Marvell 88SE92xx + JMB5XX UI: PCI-E 1X 2X 4X 8X 16X Support system: fits Windows 7/8/XP/10 fits Ubuntu Expansion Interface: 8 x SATA3.0 Interfaces . Card PCI EXPRESS Adapter Board for SATA 3.0 . Card PCI EXPRESS Adapter Board for SATA 3.0 List of packages: 1 x Expansion Card 1 x Semi-High Compartment 1 x drive disk Note: 1. PCI-E must have a socket above V2.0, V1.0 will not exceed 250M, PCI-E can be X1 or X16, as long as it is in version V2.0, there is a free X16 socket directly in the X16 slot. 2. Motherboard BOIS setting: SATA mode should be changed to AHCI, although some PCIE motherboards are version 2.0, but BOIS does not enable high-speed transmission mode by default (gen2 high-speed mode) must be enabled manually. In PCI‑E 1.0 mode only 200-250M, 2.0 mode is below 350-400M. If you do not accept this, change the motherboard.3. When the SATA port is used at the same time, it will slow down. Not suitable for users who are striving for speed. It is only used for the extended hard drive interface. . Card PCI EXPRESS Adapter Board for SATA 3.0 . Card PCI EXPRESS Adapter Board for SATA 3.0