US/UK/EU Plug Multifunctional Mini Space Heater LED Display With Remote Control100% Brand New And High Quality1. Power supply AC220-240V, 50Hz/60HZ2. When the machine is powered on, the heating and fan rotate. It works for 12 hours by default without pressing any key;3. Press the time key to switch to the timing setting. Old=press the "+-" key to set the timing time; New=press the time key to set the time, and then press the time key to switch back to the temperature setting;4. The initial display temperature is 20 . Press the up and down keys to set the temperature. The range is 15~32 ; Set the timing for 1~12 hours under the time setting;5. Press the fan key to switch between high (HH) and low (LL) fan speeds;6. When the set temperature is reached, cut off the heating. The fan will continue to work for 60 seconds and then stop. The screen displays OF. If it is lower than the set temperature - 1, reheat it;7. When the timing time is reached (if not set, it is 12 hours by default), cut off the heating, and the fan will continue to work for 60 seconds before stopping, and the screen displays OF;8. After finishing the work, press any key to restart the work (if the timing is not set, the default is 12 hours)Packageinclude:1x Space HeaterNote:1. Due to the different monitor and lighting effect, the actual color of the item may be slightly different from the color shown on the pictures.2. Please allow 1-3cm error due to manual measurement. (1 inch = 2.54 cm)Thanks for your support :)