Features: 1.XB-C100 code writer: extra large display panel, easy touch screen operation and rich display. The XB-C100 code writer port outputs enhanced TTL and 485 differential (DMX) signals, and can carry TTL/DMX512 lamps. 2.XB-C100 code writer supports operating system upgrade. The XB-C100 code writer can have a maximum of 512/2048 pixels (the DMX lamp has a maximum of 512 pixels, taking three channels as an example). 3. The XB-C100 code writer has a built-in battery that supports 10 hours of continuous operation. XB-C100 code writer has 22 built-in test effects (three-channel/four-channel built-in effects are optional). 4.XB-C100 code writer supports the mainstream model DMX512 chip, and can write codes and parameters for DMX512IC. XB-C100 code writer supports dynamic dimming and dynamic dimming. 5.XB-C100 code writer can perform DMX512IC lamp channel address test and test effect. The XB-C100 code writer can be inserted into an SD card to play effects (select K-1000-* for software effect output), and the use is the same as the K-1000C controller. Description: 1. Working temperature: -10℃ ~65℃ 2. Working power supply: DC 5V-24V input (built-in battery) 3.Battery capacity: 4000mAh 4. Power consumption: 4W 5. Data transmission port: 4pin terminal block 6. Size: about L140mm x W100mm x H40mm 7. Memory card type: SD card 8. Capacity: 128MB-32GB 9. Format: FAT or FAT32 format 10.Save File: *.LED Material: ABS colour: As shown Package Contents: 1 x Writer 1 x Screwdriver 1 x Data Cable 1 x SD Card Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.