Feature:1. Spectrum analyzer can be used to measure certain parameters of circuit systems such as amplifiers and filters.2. Used to measure signal distortion, modulation, spectrum purity, frequency stability and intermodulation distortion.3. It adopts digital circuit and microprocessor, with storage and operation functions, stable structure.4. Adopts standard interface, and the frequency range is 9kHZ to 1.000009GHZ, convenient and quick to measure.5. Display spectrum, amplitude, and frequency of signal under test, which can be displayed in a panoramic view, and select bandwidth test.Specification:Item Type: Spectrum AnalyzerMaterial: ABSMain Function:Display the spectrum, amplitude and frequency of the signal under test. It can be displayed in a panoramic view, or a bandwidth test can be selected.XSA810Frequency Range9kHZ - 1.00009GHZFrequency Resolution1HZSpan0HZ, 100HZ to the maximum frequency of the instrumentSpan Uncertainty Span / (Sweep points-1)Carrier Offset10 kHz<-80 dBc/Hz100kHz<-100 dBc/Hz1MHz<-115 dBc/HzResolution Bandwidth (-3dB)1 Hz - 1 MHz (1-3-5-10 steps)Resolution Bandwidth Accuracy<5% typicalResolution filter shape factor (60 dB: 3 dB)<5 typicalVideo Bandwidth (-3dB)10 Hz - 1 MHz (1-3-5-10 steps)Amplitude Measurement RangeDANL to +10 dBm, 100 kHz - 10 MHz, preamplifier offDANL to +20dBm, 10MHz to 1.5GHz, preamplifier offReference Level-80dBm - +30dBm, step is 0.01dBPreamplifier20 dB, nominal, 100 kHz - 1.5 GHzInput AttenuatorXSA8050 - 40dB in 1dB stepsDisplay average noise level (attenuator is 0 dB, resolution bandwidth and video bandwidth are both 100 Hz, sampling detection, average number of traces 50, 20 to 30, input impedance is 50 )Preamplifier off9 kHz - 1 MHz-95dBm (typical value), <-88dBm500MHz - 1GHz-140dBm (typical value), <-130dBmPreamplifier on100 kHz - 1 MHz-135dBm (typical value), <-128 dBm500MHz - 1GHz-160 dBm (typical value), <-150 dBmFrequency Response (20 - 30, 30% - 70% relative humidity, input attenuation 10 dB, relative to 50 MHz)Preamplifier Off (Fc9kHz)0.7 dBPreamplifier On (Fc50 MHz)1.0 dBAbsolute Amplitude AccuracyUncertaintyfc = 50 MHz, peak detector, preamplifier off, attenuator is 10 dB, input signal level = -10 dBm, 20C-30C <0.4dBTracking Source (Optional)Output Level Range-40 dBm - 0 dBmOutput Level Resolution1 dBOutput FlatnessRelative to 50 MHz 3dBTracking Source SpursHarmonic spurs-30 dBc (when the output power of the tracking generator is -10 dBm)Non-Harmonic Spurs-40 dBc (when the output power of the tracking generator is -10 dBm)Tracking Source to Input Terminal-60 dB (when the output power of the tracking source is 0 dBm)Frequency Range100 kHz - 1.000009 GHzHow to Use:1: Plug in the power supply, press the power switch to turn on2: Connect the probe to the channel3: The probe is calibrated in the 5V calibration area to see if the waveform is displayed completely4: Adjust the probe so that the waveform can be output stably5: Measurement.Package List:1 x Spectrum Analyzer1 x USB Cable1 x Power Line1 x Manual