SPECIFICATIONS:_x000D_ * Model number: SPL-2 (4 poles), SPL-3 (6 poles)_x000D_ * Shell material: Flame retardant PC_x000D_ * Internal material: PA_x000D_ * Contact strip: Copper_x000D_ * Spring clamped: Alloy steel_x000D_ * Rated current: 32A_x000D_ * Rated voltage: 250V_x000D_ * Impulse of voltage: 4KV_x000D_ * Wire cross section: 0.08-4.0mm2/28-12AWG_x000D_ * Size: 1) SPL-2: 39*13*14 mm / 1.54*0.53*0.57 inch (L*W*H)_x000D_ 2) SPL-3: 39*18*14mm / 1.53*0.73*0.57 inch (L*W*H)_x000D_ _x000D_ *Package Content : 10 x connectors_x000D_ _x000D_ How to use our products:_x000D_ First Step_x000D_ Strip the wire according to the specified length._x000D_ Second Step_x000D_ Dismantle the orange operation handle straight and plug the wire into the hole._x000D_ Third Sted_x000D_ lower the handle._x000D_ _x000D_ Problems in our lives:_x000D_ Because the electrical tape, the wiring cap and other connections are prone to aging,_x000D_ falling off, poor insulation performance, etc., the safety hazard is formed, which may _x000D_ cause personal injury such as electric shock or a short circuit of the wire to cause a _x000D_ fire. In addition, as the use of home appliances increases, the power load increases, such_x000D_ as poor contact at the wire connection (excessive resistance at the connection), and large_x000D_ resistance and large current cause heat increase, which will be a huge safety hazard._x000D_ _x000D_ We solves these problems:_x000D_ The We connector completely avoids the above-mentioned safety hazards caused by poor_x000D_ connection; our connector uses ROHS-compliant materials and is environmentally friendly;_x000D_ the shell is made of flame-retardant transparent PC, nylon PA66, and the conductor is_x000D_ tinned with pure copper. Small, low electrical loss, imported stainless steel circlip, and durable, reusable.