Description: and Features: HD IPS color screen, the color is more vivid than the ordinary TET LCD screen. The resolution is 240x240, and the display direction can be adjusted. Both horizontal screen and vertical screen are okay. Specifications: Size: app.1.3inch Input Data: SPI interface Drive IC: ST7789 Display Area: 23.4mm x 23.4mm Dimensional Outline: app.26.16mm x 29.22 mm Resolution: 240 x 240 Interface: 4 Line, SPI Interface Pins: 12 Pins Viewing Direction: All View Operating Temperature: -2070C Pins: GND: Power Ground LEDK: LED Cathode LEDA: LED Anode VDD: Power Supply for Analog D or C: Display Data or command selection pin in 4-line serial interface CS: Chip selection pin: Low enable, high disable SCL: This pin is used to be serial interface clock SDA: SPI interface input or output pin. The data is latched on the rising edge of the SCL signal. RESET: This signal will reset the device and it must be applied to properly initialize the chip. Signal is active low. Note: No retail package. Transition: 1cm=10mm=0.39inch Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you LCD screen only, other accessories in the picture are not included. Package includes: 1 x LCD Screen Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.