1.4 Chip OBD2 Scanner, CAN Diagnosis and K-Line Special Functions, Suitable for Multiple Units

30,86 €
ja 8,77 € toimitus

1.4 Chip OBD2 Scanner, CAN Diagnosis and K-Line Special Functions, Suitable for Multiple Units

  • Merkki: Unbranded
Myynyt:

1.4 Chip OBD2 Scanner, CAN Diagnosis and K-Line Special Functions, Suitable for Multiple Units

  • Merkki: Unbranded

30,86 €

Tallenna 18,51 € (37%)

ovh.

49,37 €
Varastossa
ja 8,77 € toimitus
Myynyt:

30,86 €

Tallenna 18,51 € (37%)

ovh.

49,37 €
Varastossa
ja 8,77 € toimitus

Hyväksymme seuraavat maksutavat

Kuvaus

1. Features: - 1. Conduct diagnostics via CAN and implement special functions through the K - line. - 2. Cover all electronic control units in the vehicle (diagnostic addresses range from 0x01 to 0x80). This enables users to research and diagnose some new units that other diagnostic tools cannot reach. The functions are based on CAN - TP2.0. - 3. Manually define the operation of diagnostic session C, unlike other diagnostic tools that always use the standard diagnostic session 0x89. The functions are based on CAN - TP2.0. - 4. Broadcast diagnostic requests can disable normal communication, clear fault diagnostic codes, and activate the logistics (transport) mode. The functions are based on CAN - TP2.0. - 5. Allow management of new units (and immobilizer units) and programming of PIN, BGW, etc. The functions are based on CAN - TP2.0. Most commonly used diagnostic requests, such as identification, coding, adaptation, fault diagnostic codes, etc., are available. The functions are based on CAN - TP2.0. 2. K + CAN Commander software version 1.4 - The diagnostic cable conducts diagnostics via CAN and implements special functions through the K - line. It is suitable for [information missing here], suitable for [information missing here], and suitable for (CAN) [information missing here]. The vehicle models covered are up to September 2006; it is suitable for [information missing here], and the vehicle models covered are up to 2007. 3. Functions: - 1. Correct the odometer in the instrument cluster and EDC15x. - 2. Read the security access code/log in to WFS. - 3. Read/Program the immobilizer data. - 4. Read/Write the EEPROM from the instrument cluster/immobilizer. All supported clusters CAN/K. - 5. Activate MMI TV. - 6. Read/Write the EEPROM of the engine control unit - EDC15x, - ME7.1.1, - Cartronic ME7.8, suitable for [information missing here]. - 7. There is a key learning button for easy use (no security code required). Component security authorization can be performed. - 8. Key learning of [information missing here] (no security code required) K + CAN. - 9. Perform custom memory reading from different units (such as ECU, EZS - Kessy, and xxxxx). - 10. Read the flash memory of EDC16x, EDC15x, ME7x, MED951, MED751 (the flash memory can be programmed through updates). - 11. Clear the collision data in the unit. 4. Color: Black 5. Material: ABS 6. Package contents: - 1 K + CAN Commander V1.4 cable - 1 CD driver - Only the above - mentioned items are included in the package, and no other products are included. 7. Note: - Light reflection and different monitors may cause slight differences between the color of the items in the picture and the actual product. The allowable measurement error is +/- 1 - 3 cm.
  • Fruugo ID: 399941771-851262392
  • EAN: 6902688137792

Toimitus ja palautukset

Lähetetään 3 päivän kuluessa

  • STANDARD: 8,77 € - Toimitus välillä ke 19 marraskuuta 2025–pe 28 marraskuuta 2025

Lähetyspaikka: Kiina.

Teemme parhaamme varmistaaksemme, että kaikki tilaamasi tuotteet toimitetaan sinulle toiveidesi mukaisesti. Jos sinulle toimitettu tilaus kuitenkin on puutteellinen tai sisältää tilaamattomia tuotteita, tai jos et jostain muusta syystä ole tyytyväinen tilaukseesi, voit palauttaa tilauksen kokonaan tai osittain. Saat tuotteista täyden hyvityksen. Näytä koko palautuskäytäntö

Tuotteen vaatimustenmukaisuustiedot

Katso tätä tuotetta koskevat yhteensopivuustiedot alla.

Seuraavat tiedot tarjoaa tätä tuotetta myyvä riippumaton kolmas osapuoli.

Valmistaja:
Alla oleva informaatio sisältää Fruugossa myytävän tuotteen valmistajan yhteystiedot.

  • Guangzhou Qiyi E-Commerce Co., Ltd.
  • LnitOne2
  • 3 Tangdong East Road, Unit 216, G282
  • Tianhe District
  • Guangzhou
  • china
  • 510620
  • qiyihappiness@163.com
  • (+86) 16620020838

Vastuuhenkilö EU:ssa:
Alla oleva informaatio sisältää EU:n alueen vastuuhenkilön yhteystiedot. Vastuuhenkilö on EU:n alueella sijaitseva nimetty talouden toimija, joka on vastuussa asianomaisen EU:n alueelle myytävän tuotteen vaatimustenmukaisuudesta.

  • Jessie Peng
  • Axitera GmbH
  • Kreuznacher Str. 30, D-60486 Frankfurt am Main, Hessen,
  • Frankfurt am Main
  • Germany
  • 60486
  • successservice3@gmail.com
  • (+49) 6934873848