1.With infrared function, it can be used to test whether the remote control is good or not, such as TV, air conditioner, water heater, power amplifier, etc. 2.The module board is compatible with all ATx computer power supplies of 20Pin and 24Pin. 3.With the touch switch, the service life is 550000 times and the operation is more convenient. 4.The XH2.54-2P terminal (suspended) is reserved, and two external lines can be connected to control the ATX power switch (convenient for the modification of the shell) by using the Io port (5V) or switch of the single chip computer. 5.There are 8 USB ports on the board. Each USB port can output 5V, MAX=2.1A current, which can supply power for mobile phones, tablets, mobile power supplies, flashlights, aging electronic products, etc.<br><br>6.The module adopts high-current terminal blocks (terminal withstand voltage is 300V/can pass 20A current) to solve the problem of insecure wiring caused by terminal posts and screw terminals. 7.The module will output+12V, - 12V,+5V, 5VSB and 3.3V power supplies after startup, which can make better use of ATX power supply and facilitate your use. Parameters: Output: 5V/2A Terminal block: maximum 20A output USB interface: 8 groups 5 kinds of power output:+12V, - 12V,+5V, 5VSB, 3.3V Five power output indicators: +12v normal output=display blue -12V normal output=blue +5V normal output=red 5VSB normal output=red 3.3V normal output=red Compatible: Compatible with all 20-pin and 24-pin computer power supplies Colour:Blue Material:PCB+components type:A: without Shell<br><br>Package Contents: 1 x ATX Power Adapter<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.