PATENTED ADHESIVE + SELF-ADHESIVE ADHESIVE - stronger than common self-adhesive glue and suction cups. Load capacity over 10kgs. Without drilling. No surface damage. ALL METAL - made of aluminum. Guarantee for a modern look, high quality and durability. STAINLESS - Complete aluminum design to resist scratches, corrosion and tarnishing from daily use. MATTE SURFACE - The hand-polished aluminum surfaces guarantee a modern look down to the smallest detail. EASY ASSEMBLY - usable after 24 hours. Suitable for smooth and rough surfaces. Product descriptions No Damage, No Drilling, Gricol Is Your Trust Brand Installation steps: 1. Clean the adhesive surface. The surface should be dry and free of dust, grease and wax. 2. Before assembly, mark the desired location for the product on the adhesive surface. 3. Apply the adhesive to the back of the product. 4. Remove the protective film from the 3M sticker. 5. Glue the product onto the marked adhesive surface and press it firmly for approx. 5-8 seconds. Do not move the product after assembly. 6. Wait at least 24 hours (preferably 3-5 days) for the glue to dry completely before use. Notes: 1. Not applicable on painted walls, chalky walls, wallpaper, or other soft or uneven surfaces. 2. If you are unsure whether our product is suitable for the surface or if you have any further questions, please contact our customer service. 3. The glue can simply be scraped off with a knife when it is dry. Therefore, please wait until the glue has dried before dismantling it if it overflows. 4. The drying time is longer if the humidity in the room is high. Please wait 48 hours or more before use. Technical data: - Size: 32.5cm * 11.2cm * 4.5cm / 12.8in * 4.4in * 1.8in - Weight: 386g / 0.85lb - Material: aluminum - Finish: Matte - Mounting methods: wall mounting, patented adhesive + self-adhesive 3M adhesive strip