1、With dust‑proof and waterproof sucture, it has good durability under the conditions of cooling liquid and iron filings flying 2、No built‑in amplifier required, no deviation due to temperature and power supply voltage fluctuations of the part where the tool is located, can be directly input to the NC and program PLC 3、The sharpness corner of the tool directly contacts the tip of the tool related to the machining size, and its position, size, and output signal are measured, with high accuracy. 4、Alarm signal can be sent when overavel. The product adds a blowing function, which can automatically clean the counter knife surface. 5、The shell is made of ground 4S material, durable and not easy to damageItem Type: Automatic Tool Setting GaugeOutput Mode: B: NC normally closedSoke: 5mmRepeatability: 0.001mmElecic Shock Life: 3 million timesProtection Sucture: IP67Contact Force: 1.5NMaterial of the Contact Area: Hard-bondingHousing Material: Ground 4SProtection Tube: 1 meters minimum bending radius R25Cable: 2 meters oil resistant 4-coreElecical Aspects: 1. Contact rating DC24V ± 10% 20mA maximal2. When the body of the machine is grounded, use the tool setter to install it on the side of the ground wire.3. For the tool setting insument with LED, pay attention to the connection + when connecting. Recommended value is 10mA, resistance load.4. For the output sucture when the interface unit is attached, please read the user manual 1 xAutomatic Tool Setting Gauge Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-Minnanxin