1. Latest version for greater for F.o. compatibility 2. Manufactured modification to include a switch to connect to different CAN buses 3. Designed for software 4. Compatible with software venders: , (Just support Baud rate:34800,pls check before place order), FF2 and FoCCCus, plus more Basic Features:Reset fault /trouble codes / parameter (PIDs),Change car configuration data,Run tests, procedures MS CAN bus and CAN bus support USB 25k80 With Switch For DiagnosticCable Product Introduction: One OBDII OBD2 USB with switch. Designed for communicating with for F.o., for vehicles. With this cable and of the supported software vendors you can detected modules which are not visible for regular OBD2 scanners.This includes showing you trouble codes, PIDs, running tests and procedures which are never displayed by other OBD2 scanners and a standard . Pin Configurations: Switch outside: CAN - Occupies pins 6 and 14 Switch inside: MS CAN - Occupies pins 3 and 11 Supported Software: (Just support Baud rate:34800,pls check before place order) FoCCCus Modified EML: Please note that many for and for for models (approximately since 2003-2004) are equipped with MS CAN bus, in addition to the regular CAN bus. In contrast to CAN bus, MS CAN bus is not supported by the stock , because MS CAN is a manufacturer-specific solution and located on non-OBD2 pins. This has been modified to allow it to implement the MS CAN bus. supports CAN from the stock, because for Fo-rd CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. MS CAN bus occupies pins 3 and 11. Colour:As Shown Material:ABS Package Contents: 1 * Diagnostic Scan Tool Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.