This small thing is very convenient to use. Just look for a water-filled container, put the water pipe of the watering device into it, and insert the pottery part at the other end into the pot. The clay part inserted into the soil will adjust the water volume according to the humidity of the soil. Achieve automatic watering._x000D__x000D_Features:_x000D_1. You can water all of your plants easily using this micro watering time controller._x000D_2. Great for watering flowers, plants, bonsai and potted fruit._x000D_3. This set is perfect for using in home, garden, balcony and office. _x000D_4. Easy to install and convenient to use, solves the problem of office area and balcony without faucet._x000D_5. Small size: it will not occupy the plant space, and avoid hurting the plant root._x000D__x000D_Specification:_x000D_Condition: 100% Brand New_x000D_Material: Ceramic+Plastic _x000D_Color: As shown in picture_x000D_Weight: about 85g / 3.0oz_x000D__x000D_Package List:_x000D_2 * Irrigation Kits_x000D__x000D_Instructions:_x000D_1. Soak the ceramic part of the product into water for more than 10 minutes._x000D_2. Fill the prepared water storage container with water (it is better to have a narrow bottle mouth, such as a mineral water bottle, etc.)_x000D_3. Fill the soaked pottery with water._x000D_4. After the pottery part is filled with water, the green plastic cover and the pottery part are tightly closed; in order to ensure that there is no air residue in the pottery part, the pottery part and the plastic cover can be placed under the water surface, so that the pottery part is filled with water. Cover the plastic cover under water._x000D_5. Put the other end of the automatic watering device into the container._x000D_6. Insert the whole part of the pottery into the flower pot._x000D__x000D_Tips:_x000D_1. When the lid that connects the clay head and the pipe is opened, it must be filled and then covered, in order to squeeze out the excess air, the water in the clay head, and watch the water level of the clay head the next day. It is definitely a problem with the loop, and it should be step by step from the new. The focus is on emptying the air inside the clay head._x000D_2. The water level in the bottle is lower than the height of the green plastic cover of the watering device. If the water level of the water storage container is higher than the green plastic cover of the watering device, the water may pour or even overflow._x000D_3. Please pay attention to the water requirement and flower pot size of each flower, and use the appropriate number of watering devices. Reference: The diameter of the flower pot is 10~15cm, and 1 automatic watering device is used; the diameter of the flowerpot is 15~20, 1~2; the diameter of the flowerpot is 20cm or more, using 2 or more._x000D_4. Please replenish the amount of water in the water storage container in time. If the water is not added in time, the water level of the pottery will drop. Please use the above operation method again._x000D_5. After three months of continuous use, please clean the pottery parts to avoid affecting the use effect._x000D__x000D_Note:_x000D_When using: It is recommended that the water reservoir (bucket) be placed slightly higher than the flower pot (inaccurate picture)_x000D_1. The degree of soil looseness, water absorption and the level of the water reservoir will directly affect the speed of water seepage. In a highly water-absorbing cultivation medium such as peat, the water irrigating speed of the automatic watering device will be faster than that of the soil in the slab. Relatively speaking, the higher the water level of the water reservoir, the faster the water seepage. You can adjust the level of the water level according to the actual situation you have used to achieve your own satisfactory results._x000D_2, according to the different degrees of water requirements of flowers and plants, it is recommended that a flower pot of about 15 cm with a watering device, 1-2 pieces of 15-20 cm, each increase of 5 cm in diameter, can add a watering device._x000D_3. It is possible to replace the clear water with the light liquid fertilizer in the water storage container, so that the fertilizer slowly infiltrates into the potting soil, and the plants are better absorbed._x000D__x000D_How to solve the following problems:_x000D_1. Can not absorb water (the reason is that there is no water in the thin pipe or the water storage device is low. Therefore, the pipe must be filled with water, there must be no air, the water storage device is placed slightly higher than the watering device)._x000D_2. The watering speed is too slow (the water reservoir should be placed as high as possible, so the watering speed will be faster)._x000D_3. The watering speed is too fast, the water reservoir is soon finished (increasing the water reservoir. Lower the height of the water reservoir, so that the height of the water storage device is slightly higher than the height of the water