4.3inch DSI LCD Touch Display for Raspberry Pi, 800x480 resolution, IPS screen wide angle Supports Pi 4B/3B+/3A+/3B/2B/B+/A+, CM3/3+/4(CM3/3+/4 requires extra adapter board) Supports Raspbian, 5-points touch, driver free Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free Supports Retropie, driver free 1. Capacitive touch panel, support up to 5-point touch 2. DSI interface, refresh rate up to 60Hz 3. Tempered glass capacitive touch panel, hardness up to 6H 4. When used with Raspberry Pi, supports Raspberry Pi OS / Ubuntu / Kali and Retropie, driver free. 5. Supports software control of backlight brightness Hardware connection Connect the DSI interface of 4.3inch DSI LCD to the DSI interface of Raspberry Pi. For easy use, you can fix the Raspberry Pi on the backside of the 4.3inch DSI LCD by screws Software setting Supports Raspberry Pi OS / Ubuntu / Kali and Retropie systems for Raspberry Pi. 1) Download image from the Raspberry Pi website. 2) Download the compressed file to the PC, and unzip it to get the .img file. 3) Connect the TF card to the PC, use SDFormatter software to format the TF card. 4) Open the Win32DiskImager software, select the system image downloaded in step 2, and click 'Write' to write the system image. 5) After the image has finished writing, save, and quit the TF card safely. 6) Power on the Raspberry Pi and wait for a few seconds until the LCD displays normally. And the touch function can also work after the system starts. color:Blue+black Material:PCB Package Contents: 2 x 4.3inch DSI LCD 2 x FPC 15PIN 1.0 pitch 50mm (opposite sides) 2 x Screws pack