Super design RF 433MHz wireless universal remote control. This is a duplicator device capable of cloning other remote controls. It emits a strong signal that can penetrate walls, floors, doors, and panels. Operates effectively up to 50 meters in open areas. Wide coding range supports multiple chip models including 2260, 2262 (such as PT2262, SC2262, HS2262, LX2262, HX2262, etc.), 1527 (EV1527, HS1527, HX1527, SC1527, GP1527, CP1527, AD1527, SCL1527, TL1527, ZX1527), PT2264, PT2240 (LX2240, LX2241, SCL2240), CS5211, SMC918, AX5026, SMC926, AX5326-3, AX5326-4, FP527, HT600, HT680, HT6207, HT6010, HT6012, HT6013, HT6014, HT12D, HT46F49E, PIC16F630, ULN2003. Compatibility depends on matching chip model numbers, regardless of manufacturer prefixes. Easy to use – Confirm three conditions before purchase: original remote must be functional, operating frequency must be 433.92MHz, and encoder chip code must be supported as listed. Enhanced flexibility with 4 buttons allowing cloning of up to 4 functions. Each button operates independently. Cloned remotes can be reset and reprogrammed without limitations. Broad application suitable for homes, farms, factories, offices, laboratories, supermarkets, and more. Can clone various remote types including garage doors, electric gates, shutters, sliding doors, electric curtains, fans, lights, ventilation systems, and signal transmission devices. Package includes: 3x clone remote controls Product manual Specifications: - RF Frequency: 433MHz - Battery: 2x CR2016 (included) - Buttons: 4 keys - Transmission range: Over 50 meters in open space Reset instructions: Press and hold buttons "A" and "B" together until LED flashes 3 times. Release button B while keeping A pressed, then press button B 3 times. LED will flash and then turn off indicating successful reset. Programming instructions: 1. Place the original remote and the cloning remote back-to-back ensuring direct contact or placed side by side as close as possible. 2. Press and hold a button on the original remote, then press and hold the corresponding button on the cloning remote. Keep both buttons pressed until the LED flashes twice, then three times, and remains steady—indicating successful cloning. If the LED does not reach the second flash, slowly move the remotes up and down to find the optimal alignment for signal transfer.