4. Product should be ok to use for children 10+ 1. Simply heat the pellets in water to over 42°C (Needs water thats been boiled). 3. Do not . if swallowed. Good ductility (Tg: -60C ) ; Melting point is 58°C -62°C. High crystallinity and low melting point 5. Product may become . Size: 4mm Material: Polycaprolactone Good dissolubility 2. Leave the pellets to melt in the water until they turn transparent. 2. Wait around 5 min after it cools down before you reheat and reshape it again. 1 Bag polymorph Thermoplastic Color: White 4. Allow the polymorph to cool until solid. Temporary , and more DIY Crafts, Tools, Grips, Repairs, Games, , Jewelry, Robot parts. 3. the pellets from the water and mould by hand (add color at this stage if required) 5. Re-heat if further molding is required. 1. Never heat polymorph over 200 ºC as this will damage the polymer. Color: White 3. The Pellets From The Water And Mould By Hand (add Color At This Stage If Required) 1. Simply Heat The Pellets In Water To Over 42°C (Needs Water Thats Been Boiled). Good Ductility (Tg: -60C ) ; Melting Point Is 58°C -62°C. 1 Bag Polymorph Thermoplastic