Details Heat Dissipation Holes: The multi-angle heat dissipation holes ensure the smooth and efficient operation of the built-in heat pipes. Clear Function Markings: The clear function markings on the operation panel help you operate more accurately. How to Set Temperature General Setting: Press and hold the * key for more than 1 second to enter the temperature setting mode, and press the * key again to switch the number of digits of the temperature value to be set, and to set by the raise or lower temperature key. Temperature Instant Setting: In the constant temperature state of the heating table, directly press the key to raise or lower the temperature to adjust the current working temperature by ±50℃. Application This product can be used for reflow soldering and preheating of some circuit boards and other processes that require overall uniform heating. It can be used for splitting, repairing cell phone screens, LED displays, component work, PCB dismantling, soldering work, component heating work, SMD rebuilding work (demolition, welding applicable temperature: 428~500℉), packaging box plastic sealing hot film work, etc. and widely used in biology, electronics industry, medical research work. Specification Material: Aerospace Aluminum, Aluminum Alloy Color: Blue Process: Brushed, Baked Assembly Required: No Plug Size: EU Standard Input: 220-250V AC 50/60Hz Power: 800W Constant Temp Stability: ±1.5℃/34.7℉ Temperature Range: Room Temperature~350℃/662℉ Temperature Display: Three Digits (Display Resolution: 1℃/33.8℉) Display Mode: HD LCD Digital Display Gross Weight: 3.5kg/ 7.7 lbs Net Weight: 2.77kg/ 6 lbs Product Size: 20*20*20 cm/ 7.8*7.8*7.8in Package Size: 28*28*21.6 cm/ 11*11*8.5 in Package Included 1 * Microcomputer Electric Hot Plate 1 * Chinese and English Manual 1 * Power Cord Notes 1.Please connect the ground wire before use. 2.The temperature of the heating plate is very high, please avoid scalding. 3.Please do not put it near flammable objects. 4.The ventilation window on the housing must not be blocked by objects to avoid affecting its heat dissipation effect. 5.Metal objects cannot be put into the ventilation window to avoid electric shock. 6.As the heating table is a machined product, it is normal that the residual oil in the screw hole will evaporate white smoke and odor after heating, and this phenomenon will disappear after using for a period of time. 7.Please do not change the internal parameter settings without permission. 8.The table surface of the heating table should be flat and the material must be heat resistant. 9.If you need to move or touch the machine, please remember to cut off the power and wait for the heating plate to cool completely to room temperature. 10.This machine is a high-temperature electric heating product, please remember to cut off the power supply to avoid danger and accidents if you are not using the machine. 11.In order to prolong the life of the heater and the machine, it is prohibited to use the machine for a long time at high temperatures (above 572℉). Generally, the machine should not be operated continuously for more than eight hours. 12.Please do not let the airflow blow directly on the plate surface, otherwise, it will affect the heating of the heater. 13.The heating temperature may exceed the user setting temperature of 37.4-41℉ when the machine is first turned on, and the temperature drops to the setting temperature after a few minutes. This feature improves the temperature uniformity of the heating table. 14.The device will make a crunching sound when used, which is caused by the heat pipe thermal expansion and contraction rubbing against the mounting hole wall and pressure plate. Please feel free to use the product as it is not dangerous. 15.Products with electrical plugs are designed for use in the EU. Please check compatibility before purchasing. 16.Please read the operating manual completely before use. And pay particular attention to the safety instructions included.