Automatic Water Level Control Valve Tower Floating Tank Ball Valve

26,72 €
ja 7,52 € toimitus

Automatic Water Level Control Valve Tower Floating Tank Ball Valve

  • Merkki: Unbranded
Myynyt:

Automatic Water Level Control Valve Tower Floating Tank Ball Valve

  • Merkki: Unbranded
Ohjevähittäishinta: 32,99 €
Hinta: 26,72 €
Säästät: 6,27 € (19%)
Myynyt:
26,72 €
ja 7,52 € toimitus

Varastossa

Hyväksymme seuraavat maksutavat

Kuvaus

This valve is a replacement for the traditional float, which can be used for various high water water systems, swimming pools, water towers of industry and civil construction, etc. OOTDTY Automatic control, low self-replenishing water, water fully automatic stopFour inlets, large water volumeBeautiful appearance, small size, practical, simple installationNo electricity, easy to use, long service life, low failure rate, saving water resourcesWorking pressure range: 1-10KG (0.1-1mpa)Application Medium: water cleaningSuitable temperature Medium: le; 70 °C High Temperature Resistance Average Temperature: 70 °C - 120 °C When the pool level or water tank drops, the valve body will fall, and then the control valve precursor will be opened. Because it affects the water pressure in the pipe, the sealing surface of the control valve will be opened. Finally, the water comes out and vice versa. Note: This production belongs to liquid level control valves. Once installed, the float must be vertical. If you want to install from the top, the elbow needed to connect the float valve and inlet pipe. Firstly, the supply line should be fixed in the horizontal plane, and then connect an automatic valve to adjust the water level at the water inlet according to the standard. The main water inlet should be lined with the normal diameter of the control valves. The ball valve should be open when in use. If two valves are installed in the same pool, the two valves should be kept in the same horizontal plane. Before installation, clean the debris in the pipes in case of blockage. If the water quality is not good, the valves must be properly maintained. If users find that the time of adding water becomes longer, they can just load the water inlet and wash it Material: Nylon PA66 + Food Grade RubberSize: 72x50x70mm Quantity: 1 PcNote: Please allow 1-3mm error due to manual measurement. Pls make sure you do not mind before you make a bid, due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you!Package Content:1 x Water Level Adjusting Valve
  • Fruugo ID: 397937786-848446203
  • EAN: 6935170165430

Toimitus ja palautukset

Lähetetään 5 päivän kuluessa

  • STANDARD: 7,52 € - Toimitus välillä pe 17 lokakuuta 2025–pe 31 lokakuuta 2025

Lähetyspaikka: Alankomaat.

Teemme parhaamme varmistaaksemme, että kaikki tilaamasi tuotteet toimitetaan sinulle toiveidesi mukaisesti. Jos sinulle toimitettu tilaus kuitenkin on puutteellinen tai sisältää tilaamattomia tuotteita, tai jos et jostain muusta syystä ole tyytyväinen tilaukseesi, voit palauttaa tilauksen kokonaan tai osittain. Saat tuotteista täyden hyvityksen. Näytä koko palautuskäytäntö

Tuotteen vaatimustenmukaisuustiedot

Katso tätä tuotetta koskevat yhteensopivuustiedot alla.

Seuraavat tiedot tarjoaa tätä tuotetta myyvä riippumaton kolmas osapuoli.

Valmistaja:
Alla oleva informaatio sisältää Fruugossa myytävän tuotteen valmistajan yhteystiedot.

  • Zion Creative B.V
  • Zion Creative B.V
  • Herengracht 449A R13
  • Amsterdam
  • Netherlands
  • 1017BR
  • zioncreative01@outlook.com

Vastuuhenkilö EU:ssa:
Alla oleva informaatio sisältää EU:n alueen vastuuhenkilön yhteystiedot. Vastuuhenkilö on EU:n alueella sijaitseva nimetty talouden toimija, joka on vastuussa asianomaisen EU:n alueelle myytävän tuotteen vaatimustenmukaisuudesta.

  • VAT SPEED SL
  • VAT SPEED SL
  • Calle Antonio Salvador N99.1
  • Madrid
  • Spain
  • 28026
  • services@vatspeed-eu.com