Car Electric Turbine Power Turbo Charger Tan Boost Air Intake Fan DC Brushless Motor Universal Auto Parts _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ Car Electric Turbine Power Turbo Charger Tan Boost Air Intake Fan DC Brushless Motor Universal Auto Parts _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ This kind of modification is more violent, and the wind pressure is very high. Suitable for customers who require high performance improvement _x005F_x000D_ Speed: 35000 rpm; Input Voltage: DC 12V; Maximum current: 24A _x005F_x000D_ Maximum power: 380W; Maximum thrust: 1200g; KV value: 3100 _x005F_x000D_ Notice:Don`t wiring the turbine directly to Power.This have to connected up Driver ESC electronic speed control.Don`t Let the turbine contact with car iron part(because of other iron part also negative electrode "-") _x005F_x000D_ _x005F_x000D_ Please operate according to the following operation mode: _x005F_x000D_ a. Power off first _x005F_x000D_ b. Esc switch knob is screwed to the minimum position. _x005F_x000D_ C. To connect dc 12 volt battery. _x005F_x000D_ Step _x005F_x000D_ The first step is to insert the three-needle plug into the out position of the tester. The white line is on the s-pole. _x005F_x000D_ There are three rows of arbitrary plugs in one row, and the knob is set to the minimum position. _x005F_x000D_ The second step is to weld the three rows of motor wires with the three wires adjusted by electricity without any color difference. _x005F_x000D_ After welding, tape should be wrapped to prevent short circuit. _x005F_x000D_ The third step is to connect a DC 12 volt power supply to an electrically regulated red connection positive pole and a black connection to the negative pole. _x005F_x000D_ After power on, the motor will make a sound, stop ringing after a few seconds, then slowly twist the knob of the tester to start the motor, _x005F_x000D_ the normal operation of the wind is from the motor tail discharge, if not to indicate that the motor reversed, the need to remove two of the motor wires to adjust and then welding,then the motor works properly. _x005F_x000D_ Colour:Silver+Black _x005F_x000D_ Material:aluminum _x005F_x000D_ Different batches may have different appearances, but will not affect the use _x005F_x000D_ _x005F_x000D_ Package Contents: _x005F_x000D_ 1x Turbo Charger _x005F_x000D_ 1x Brushless Motor _x005F_x000D_ _x005F_x000D_ Only the above package content, other products are not included. _x005F_x000D_ Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_ _x005F_x000D_