Description: Function: Place your chip signal in the steering lock position through coil connection, and this bypass module allows your car to read the chip code, achieving remote engine and car alarms. Lightweight: The signal bypass module is lightweight, easy to carry, and easy to install. ABS: Made of ABS material, it is durable for a long time. Suitable: Suitable for most chips. Installation: Two wire connection, easy to install. Specification: Material: ABS. Color: As shown. Size: Approx.11x9x4cm/4.33x3.54x1.57 inch. Note: Installation: 1. Remove the screws from the bypass module control box and open the control box; 2. Insert for OEM cars or chips under the wires; 3. Lock the storage cabinet and place the wires near the remote control or chip; 4. Tighten the screws and lock them tightly; 5. Wind the induction wire on the original car socket once (multiple turns can enhance the signal); 6. Fix the sensing wire to the car socket with glue; 7. Test drive the engine to confirm if the bypass module is working. If it doesn't work, please try to make multiple turns on the car socket or check if the connection is correct; 8. Place the bypass module in place. Package Includes: 1 Piece Bypass Module With Coil. 1 Piece Instructions.