1. The SDKO8 Test Clip Can Clamp Chip Pins With A Pitch Greater Than 0.3mm. 2. Chip Universal Test Hook 3. Clamping Of Small Pitch Chip Pins 4. Push The Opening Of The Clip Out Until It Is About The Same Size As A Single Pin Of The Chip, And Push It Forward Slightly While Moving It Gently With Your Hand. 5. Do Not Forcefully Pull Off The Clip After Use. Correct Operation Should Push Out The Clip And Gently Remove It From The Chip Pins. Repair Method For Chip Pins That Cannot Be Clamped Tightly: Use Tweezers To Adjust The Front End Of The Clamp So That The Angle Is Close To 90 Degrees. Model: SDK08 Rated Voltage: 40V Rated Current: 2A Note:Different Batches May Have Differences In Product Appearance, Color, And Printed Characters, Which Will Not Affect The Use Colour:As Shown Material:plastic Package Contents: 10 x Test Clips 1 set x Male And Female Dupont Wires (10 Each) Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.