This is an RTL SDR blog receiver with RTL2832U ADC chip, R828D tuner, 1PPM TCXO, SMA F connector and aluminium case with passive cooling. Tunes from 500 kHz to 1.7 GHz with up to 3.2 MHz (2.4 MHz stable) of bandwidth. Perfect compatible use as a computer based radio scanner with free software like compatible SDR#, compatible HDSDR, compatible SDR-Radio, compatible GQRX or compatible SDR Touch on compatible Android. Works on , OSX, Linux, Android and Computers like The compatible . Great compatible many applications including general radio scanning, air traffic control, public safety, compatible ADS-B aircraft radar, compatible marine , compatible ACARS, compatible trunked radio, compatible P25/MotoTRBO digital voice, compatible POCSAG, compatible weather balloons, compatible APRS, compatible APT/ Meteor M2 weather satellites, radio astronomy, , or as a low cost panadapter with a ham radio. This model has several improvements over other . It uses the improved R828D tuner, has an improved front end with filtering, a 1PPM TCXO, better components, a redesigned lower noise PCB, cooling improvements, extra ESD protection and an SMA F connector. It also has a software activatable bias-tee compatible powering LNA's and active antennas. It also has HF reception capabilities. Most standard RTL-SDR dongles can tune down to 24 MHz at the lowest. This model has a built in upconverter, and allows compatible tuning down to 500 kHz. There is a built in 28.8 MHz low pass filter compatible optimizing this mode. Please note, this is the V4 unit and not all software is compatible with it yet! Compatibility with most programs on and Linux is now OK, but compatible MacOS and compatible Android is still catching up. Colour:Photo Color Material:plastic Package Contents: 1 x Radio Receiver Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.