Powered by the ESP32-S3 solution, this CoreS3 features a dual-core Xtensa LX7 processor running at 240MHz. CoreS3 comes equipped with built-in Wi-Fi functionality, enabling seamless connectivity. It boasts 16MB of onboard flash memory and 8MB of PSRAM, providing ample space for program storage. CoreS3 offers convenient programming options through its TYPE-C interface, supporting OTG and CDC functions. This allows for easy connection with external USB devices and hassle-free firmware flashing. CoreS3 features a 2.0-inch capacitive touch IPS screen, protected by high-strength glass material. Additionally, a 30W pixel camera GC0308 is integrated at the bottom of the screen, accompanied by a proximity sensor LTR-553ALS- for enhanced functionality. CoreS3 also features a 6- attitude sensor BMI270 and a magnetometer BMM150 for precise motion detection. With the onboard TF-card (micro-SD) card slot and BM8563 RTC chip, accurate timing and sleep-timer wake-up functions are readily available. Sound output on CoreS3 is optimized with the high-fidelity 16-bit I2S power amplifier chip AW88298, accompanied by a built-in 1W speaker for clear audio playback. For sound input, the kit incorporates the ES7210 audio decoding chip and dual-microphone input. The side of the device includes an power button and restart () button, complemented by a self-built delay circuit. By long-pressing the reset button, users can easily enter the program download mode. The CoreS3 kit comes with the DinBase Base, It can be powered by an external DC 12V (supports 9-24V) or an internal 500mAh lithium battery. CoreS3 is an ideal choice for IoT development, various DIY project development, smart home control systems, and industrial automation control systems. Note:Due to different production batches, there are differences in printing screen printing, which does not affect the use. Colour:Dark Gray Material:plastic Package Contents: 1 * CoreS3 Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.