CP2112 highly integrated USB to SMBus bridge controller integrates a USB2.0 full-speed function controller, USB transceiver oscillator, and 8 GP10 pins. Through a simple GUI-based Single configurator, all customizations and configurations are selected, eliminating the need to develop complex firmware for standard HID-class devices. Comes with software and drivers. The CP2112 device enables fast USB connectivity with minimal development effort. 1. USB bus powered 4.0 to 5.25V 2. Self-powered 3.0 to 3.6V, I/O voltage 1.8V to 3. Working environment temperature: -40°C~85°C 4. On-chip reset circuit, on-chip voltage regulator: 3.45V output 5. Complies with USB specification 2.0 standard, full speed (12Mbps) 6. Supports USB suspend mode via SUSPEND pin 7. Integrated 194-byte one-time programmable ROM for storing customizable product information 8.512-byte SMBus data buffer, configurable clock speed device address 7-bit value. CP2112 slave device address 9. For Windows and Linux HID to SMBus libraries for rapid application development API, open river access interface specification 10. 8 GPIOs configurable as input/output and open-drain/push-pull for external devices Configurable clock output 48MHz to 94KHZ, read/write SMBus device switched LED 11. Application areas: portable controller, USB dongle, data logger Material: Plastic+Metal Color: Purple Package Contents: 1 x Module 2 x Row Pins (Only the above package content is included; other products are not.) Note: Light reflections and different displays may cause the color of the item in the picture to differ slightly from the real item. The allowed measurement error is +/- 1-3 cm.