Easy-to-use DC power analyser 0 - 60V 0 - 100A for measuring power flow in a low voltage circuit such as the flow - in - and the cumulative rate of flow - in Watt-hours - from a solar panel or a DC wind generator into a battery. Simple +positive/-negative (GND) two-wire input (Source) and two-wire output (Load) for series insertion into circuit. Two-line LCD - updated every 0.4 seconds - displays eight different values: Power 0 - 6554 to 0.1W resolution Current 0 - 100 Amps (max) 50A continuous to 0.01A resolution Voltage 4 - 60 Volts to 0.01V resolution Power flow rate 0 - 6554 Watt-hours (Wh) to 0.1Wh resolution Current flow rate 0 - 65 Amp-hours (Ah) to 0.001Ah resolution current in Amps power in Voltage minimum (dip) over monitoring period Low in-circuit resistance just 0.001 Ohms negligible 7mA circuit load. Due to different batches, there may be differences in the appearance, color, and printing of the product, which not affect its use. Colour:blue Material:Metal Package Contents: 1 x Analyser Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Product Notes: Please allow a little manual errors.Due to the lighting of the photos and the difference of monitors, the pictures may not reflect the actual color of the real item. Please confirm acceptance before ordering. About Shipping: Please ensure your shipping informations are correct to avoid delivery issues. All orders are shipped within 3 days after payment. Delivery usually takes 8–12 days, The specific delivery time is depend on circumstances. If you have any questions during your purchase, feel free to contact us. We will respond you within 24 hours.