DC Current Detection Module, 10A Relay Output, YYI-2 Model, Digital Display Motor Controller 12V

21,95 €
ja 8,99 € toimitus

DC Current Detection Module, 10A Relay Output, YYI-2 Model, Digital Display Motor Controller 12V

  • Merkki: Unbranded
Myynyt:

DC Current Detection Module, 10A Relay Output, YYI-2 Model, Digital Display Motor Controller 12V

  • Merkki: Unbranded

21,95 €

Tallenna 14,00 € (38%)

ovh.

35,95 €
Varastossa
ja 8,99 € toimitus

14 päivän palautuskäytäntö

Myynyt:

21,95 €

Tallenna 14,00 € (38%)

ovh.

35,95 €
Varastossa
ja 8,99 € toimitus

14 päivän palautuskäytäntö

Maksutavat:

Kuvaus

DC Current Detection Module, 10A Relay Output, YYI-2 Model, Digital Display Motor Controller 12V

①. DC Current Detection Module Relay Switch Sensor Digital Display Motor Controller 12V ②. Item Type: DC Current Detection Module ③. Product Model: YYI-2. When the detection current is too large or too small, the control relay switch will control the circuit to be on or off, or give a signal; ④. Detection Accuracy: 0.01A (10mA) ⑤. Error Calibration: With error calibration function, and the display can be turned off for a long time to reduce power consumption; ⑥. Standby Current: About 20mA; ⑦. Relay Output: Can control the on and off of DC lines within 10A; ⑧. Function ⑨. 1. P-11: When the measured current is greater than I1, the relay is closed; when the measured current is less than I1 again, the relay is disconnected; ⑩. 2. P-12: When the measured current is greater than I1, the relay is closed; and it will always stay closed until the circuit board is powered off; ⑪. 3. P-21: When the measured current is greater than I2, the relay is closed; when the measured current is less than I1, the relay is disconnected; ⑫. 4. P-22: When the measured current is greater than I2, the relay is closed; and it will always stay closed until the circuit board is powered off; ⑬. 5. P-31: When the measured current is less than I1, the relay is closed; when the current is greater than I2, the relay is disconnected; ⑭. 6. P-32: When the measured current is less than I1, the relay is closed; and it will always stay closed until the circuit board is powered off; ⑮. 7. P-41: When the measured current is between I1 and I2, the relay is closed, otherwise the relay is disconnected; ⑯. 8. P-42: When the measured current is between I1 and I2, the relay is closed; and it will always stay closed until the circuit board is powered off; ⑰. 9. P-51: When the measured current is less than I1 or greater than I2, the relay is closed, otherwise the relay is disconnected; ⑱. 10. P-52: When the measured current is less than I1 or greater than I2, the relay is closed; and it will always stay closed until the circuit board is powered off; ⑲. Setting Instructions: ⑳. 1. Power on to display the measured current; (if the measured current terminal is suspended, the number of digital display is normal); ㉑. 2. The first time K1 is pressed, it takes more than 1 second to be effective to prevent false triggering. The screen displays: P 11: K2 adjustment mode, K3 adjustment function; ㉒. 3. Press K1 for the second time, the screen flashes: 0.05 means that the value of the threshold I1 is 0.05A; K2 sets I1 plus, K3 sets I1 minus; ㉓. 4. Press K1 for the third time, the screen flashes: 0.10 means the value of the threshold I2 is 0.1A; K2 sets I2 plus, K3 sets I2 minus; ㉔. 5. Press K1 for the fourth time, the screen displays the measured current; it means it enters the standby state; ㉕. 6. In standby mode, long press K2 or K3 to fine tune the measured current error.
  • Fruugo ID: 462328378-973119946

Toimitus ja palautukset

Lähetetään 3 päivän kuluessa

  • STANDARD: 8,99 € - Toimitus välillä ma 09 helmikuuta 2026–ke 18 helmikuuta 2026

Lähetyspaikka: Kiina.

Teemme parhaamme varmistaaksemme, että kaikki tilaamasi tuotteet toimitetaan sinulle toiveidesi mukaisesti. Jos sinulle toimitettu tilaus kuitenkin on puutteellinen tai sisältää tilaamattomia tuotteita, tai jos et jostain muusta syystä ole tyytyväinen tilaukseesi, voit palauttaa tilauksen kokonaan tai osittain. Saat tuotteista täyden hyvityksen. Näytä koko palautuskäytäntö

Tuotteen vaatimustenmukaisuustiedot

Katso tätä tuotetta koskevat yhteensopivuustiedot alla.

Seuraavat tiedot tarjoaa tätä tuotetta myyvä riippumaton kolmas osapuoli.

Valmistaja:
Alla oleva informaatio sisältää Fruugossa myytävän tuotteen valmistajan yhteystiedot.

  • Guangzhou Qiyi E-Commerce Co., Ltd.
  • LnitOne2
  • 3 Tangdong East Road, Unit 216, G282
  • Tianhe District
  • Guangzhou
  • china
  • 510620
  • qiyihappiness@163.com
  • (+86) 16620020838

Vastuuhenkilö EU:ssa:
Alla oleva informaatio sisältää EU:n alueen vastuuhenkilön yhteystiedot. Vastuuhenkilö on EU:n alueella sijaitseva nimetty talouden toimija, joka on vastuussa asianomaisen EU:n alueelle myytävän tuotteen vaatimustenmukaisuudesta.

  • Jessie Peng
  • Axitera GmbH
  • Kreuznacher Str. 30, D-60486 Frankfurt am Main, Hessen,
  • Frankfurt am Main
  • Germany
  • 60486
  • successservice3@gmail.com
  • (+49) 6934873848