DC6-12V High Voltage Pulse Generator Inverter Super Arc Pulse Ignition Module (901-2)

14,95 €
ILMAINEN toimitus

DC6-12V High Voltage Pulse Generator Inverter Super Arc Pulse Ignition Module (901-2)

  • Merkki: Unbranded

DC6-12V High Voltage Pulse Generator Inverter Super Arc Pulse Ignition Module (901-2)

  • Merkki: Unbranded
Ohjevähittäishinta: 18,95 €
Hinta: 14,95 €
Säästät: 4,00 € (21%)
Myynyt:
14,95 €
ILMAINEN toimitus

Varastossa

Hyväksymme seuraavat maksutavat

Kuvaus

Features:It can be used as high voltage source for high school science experiment, electronic instrument, negative ion generator and little science.After the input of dc 6-12V voltage, a dc high voltage of about 10,000V (about 1-2 cm of arc) can be obtained at the output end.It can generate high temperature and high frequency arc, can easily ignite combustible.According to the tesla coil principle, the module outputs high voltage pulse current, small volume and high efficiency.The peripheral circuit is simple (simply connect the switch, Install the battery), the discharge strength is violent.Specification:Model(Optional): 901-2(work continuously for 10s), 901-c2(work continuously for 1 min)(Note: it is strictly forbidden to exceed working time)Input voltage: DC6-12VInput current: 1A-3A (related to voltage)High pressure type: pulse high and low pressure integrated typeOutput voltage: approx.0.5-1 million V(please pay attention to safety when using)Discharge distance between high pressure poles: 10-20mmOutput high-voltage wire length: approx.100mmInput power wire length: approx. 100mm (the red wire is positive)Size:86*25mm/3.4*1inWeight: Approx.63g~72g/2.2oz~2.5ozNote:1.Avoid high-voltage no-load power supply. (it is necessary to adjust the appropriate distance of the high-voltage cable end before energizing. The distance of the high-voltage cable to pull the arc is directly proportional to the voltage and capacity of the battery used. When measuring arc distance, the test shall be conducted from short to long. 2.Power is strictly forbidden when exceeding the maximum arc distance. As the high voltage energy cannot be released, modules are easily damaged.3.About the input power: 2pcs3.7-v lithium battery can be used in series, such as 18650 battery, idle cell phone battery (to remove the protection board, recommended capacity above 2000mAh) or Nickel-cadmium/Ni-mh battery pack, or 6V lead Acid batteries.4.Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering..
  • Fruugo ID: 416673585-879148826
  • EAN: 7540131772580

Tuoteturvallisuustiedot

Katso tätä tuotetta koskevat tuoteturvallisuustiedot alla

Seuraavat tiedot tarjoaa tätä tuotetta myyvä riippumaton kolmas osapuoli.

Tuoteturvallisuustarrat

CE Mark
Turvallisuusvaroitukset: Warning: Please read the product instructions carefully before use to ensure correct use.
Sarjanumero: 7540131772580

Toimitus ja palautukset

Lähetetään 2 päivän kuluessa

  • STANDARD: ILMAINEN - Toimitus välillä pe 10 lokakuuta 2025–pe 17 lokakuuta 2025 - ILMAINEN

Lähetyspaikka: Kiina.

Teemme parhaamme varmistaaksemme, että kaikki tilaamasi tuotteet toimitetaan sinulle toiveidesi mukaisesti. Jos sinulle toimitettu tilaus kuitenkin on puutteellinen tai sisältää tilaamattomia tuotteita, tai jos et jostain muusta syystä ole tyytyväinen tilaukseesi, voit palauttaa tilauksen kokonaan tai osittain. Saat tuotteista täyden hyvityksen. Näytä koko palautuskäytäntö

Tuotteen vaatimustenmukaisuustiedot

Katso tätä tuotetta koskevat yhteensopivuustiedot alla.

Seuraavat tiedot tarjoaa tätä tuotetta myyvä riippumaton kolmas osapuoli.

Valmistaja:
Alla oleva informaatio sisältää Fruugossa myytävän tuotteen valmistajan yhteystiedot.

  • Wuhan Pinsheng Technology Co., Ltd.
  • Wuhan Pinsheng Technology Co., Ltd.
  • No.A357,Shoulder-to-shoulder?Incubator,Building?4
  • Wuchang District
  • Wuhan
  • CN
  • 430000
  • pinsenkj@163.com
  • 18062524796
  • https://shop01473o1711614.1688.com/page/creditdetail.htm?spm=a261y.7663282.shopNavigation.1.6310755czE9SFQ

Vastuuhenkilö EU:ssa:
Alla oleva informaatio sisältää EU:n alueen vastuuhenkilön yhteystiedot. Vastuuhenkilö on EU:n alueella sijaitseva nimetty talouden toimija, joka on vastuussa asianomaisen EU:n alueelle myytävän tuotteen vaatimustenmukaisuudesta.

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795