ESP32-S2 Development Board For 9.0 Flashing And Tossing Version

15,95 €
ja 8,49 € toimitus

ESP32-S2 Development Board For 9.0 Flashing And Tossing Version

  • Merkki: Unbranded

ESP32-S2 Development Board For 9.0 Flashing And Tossing Version

  • Merkki: Unbranded
Ohjevähittäishinta: 40,95 €
Hinta: 15,95 €
Säästät: 25,00 € (61%)
Myynyt:
15,95 €
ja 8,49 € toimitus

Varastossa

Hyväksymme seuraavat maksutavat

Kuvaus

Features: 1. High quality materials, , and have a long service life.2. Small in size, light in weight, and convenient to carry.3. Stable performance, plug and play.4. The onboard ESP32-S2-WROOM module has a FIash storage capacity of 4MB and can be used for PS49.0 flashing without the need for a USB cable.5. There is no need to tinker with driving and burning firmware on your own, and there is no need to repeatedly plug and unplug. It can be continuously plugged into the USB port for long-term stable operation and convenient use.Description: The module used is ESP32-S2-WROOM, with a FIash storage capacity of 4MB, which can be used for PS49.0 flashing and switching. No USB cable is required, and it can be directly plugged into a USB port for more convenient use.The default firmware burned can be used immediately upon arrival, without the need to tinker with the driver to burn the firmware, and without the need for repeated plugging and unplugging. It can be continuously plugged into the USB port for long-term stable operation and convenient use.Parameter:ESP32-S2-WROOM is a general-purpose Wi Fi MCU module that uses PCB onboard antennas, with powerful functions and rich peripheral interfaces. It can be used in scenarios such as wearable electronic devices and smart homes.MCU:Built in ESP32-S2 chip, Xtensa Single core 32-bit LX7 microprocessor, supporting clock frequencies up to 240 MHz128 KB ROM320 KB 16 KB Wi Fi:802.11 b/gData rate up to 150 MbpsFrame Aggregation (TX/RX A-MPDU, RX A-MSDU)0.4 s protection intervalWorking channel center frequency range: 2412~2484 MHzHardware:Module interfaces: GPIO, SPI, LCD interface, UART, I2C, I2S, Camera interface, IR, pulse counter, LED PWM, USB 1.1 OTG, ADC, , touch sensor, temperature sensor40 MHz integrated crystal oscillator4 MB SPI flashWorking voltage/supply voltage: 3.0~3.6 VSuggested working temperature range: -40~85 C
  • Fruugo ID: 394313998-842831249
  • EAN: 4069171496278

Toimitus ja palautukset

Lähetetään 2 päivän kuluessa

  • STANDARD: 8,49 € - Toimitus välillä ti 07 lokakuuta 2025–ti 14 lokakuuta 2025

Lähetyspaikka: Kiina.

Teemme parhaamme varmistaaksemme, että kaikki tilaamasi tuotteet toimitetaan sinulle toiveidesi mukaisesti. Jos sinulle toimitettu tilaus kuitenkin on puutteellinen tai sisältää tilaamattomia tuotteita, tai jos et jostain muusta syystä ole tyytyväinen tilaukseesi, voit palauttaa tilauksen kokonaan tai osittain. Saat tuotteista täyden hyvityksen. Näytä koko palautuskäytäntö

Tuotteen vaatimustenmukaisuustiedot

Katso tätä tuotetta koskevat yhteensopivuustiedot alla.

Seuraavat tiedot tarjoaa tätä tuotetta myyvä riippumaton kolmas osapuoli.

Valmistaja:
Alla oleva informaatio sisältää Fruugossa myytävän tuotteen valmistajan yhteystiedot.

  • Zhengzhou Guancheng Hui District Sales Department Store
  • Zhengzhou Guancheng Hui District Sales Department Store
  • No. 418, Unit 2, Building 2, Geological Team Family Courtyard, No. 3 Xinzheng Road
  • Zhengzhou
  • CN
  • 450000
  • ranren01792@163.com
  • 18537367677

Vastuuhenkilö EU:ssa:
Alla oleva informaatio sisältää EU:n alueen vastuuhenkilön yhteystiedot. Vastuuhenkilö on EU:n alueella sijaitseva nimetty talouden toimija, joka on vastuussa asianomaisen EU:n alueelle myytävän tuotteen vaatimustenmukaisuudesta.

  • EC REP SERVICES SL
  • EC REP SERVICES SL
  • Calle Gran Via 49, 7 Dch
  • Madrid
  • ES
  • 28013
  • ecrepservice@hotmail.com
  • 0034-682797075