HAKRC 4 in 1 ESC 45A Electronic Speed Controller with Double Hole Spacing for FPV RC Drone

59,00 €
ILMAINEN toimitus

HAKRC 4 in 1 ESC 45A Electronic Speed Controller with Double Hole Spacing for FPV RC Drone

  • Merkki: Unbranded
Myynyt:

HAKRC 4 in 1 ESC 45A Electronic Speed Controller with Double Hole Spacing for FPV RC Drone

  • Merkki: Unbranded

59,00 €

Tallenna 15,00 € (20%)

ovh.

74,00 €
Varastossa
ILMAINEN toimitus
Myynyt:

59,00 €

Tallenna 15,00 € (20%)

ovh.

74,00 €
Varastossa
ILMAINEN toimitus

Hyväksymme seuraavat maksutavat

Kuvaus

Feature:1. Main Control Chip: EMF8BB21F16G main control chip, operating frequency up to 48MHz, 3 in 1 IC driver, imported high quality high frequency ceramic capacitor. High end PCB production process, pads are metalized edge cladding, so that you can avoid pads falling off when using. 3 ounces copper thick, six layers plate, greatly reduces heat, resulting in higher efficiency.2. High Performance 45A ESC: Integrated with 4pcs high performance 45A ESC, double hole spacing design. With such a high degree of integration, the volume is only general size with the traversing machine, and the installation and wiring will become very simple. This incredible size and volume is specially designed for the racing class traverser.3. Rich Functions: Using BLHeliS firmware, powerful performance, rich functions, and support a variety of ways to set the ESC parameters, or upgrade the ESC firmware (such as through the throttle signal cable, using other development boards, or using cleanflight or Betaflight firmware to set or upgrade the ESC).4. PWM Hardware Drive Motor: PWM hardware drive motor, low noise, more flowing throttle response. Damped Light technology and regenerative braking function make motor deceleration more sensitive and effective, and control more accurate. Active continuation technology, so that the battery recovery power, prolong the duration of navigation.5. Anti Interference and Quick Response: Support not only ordinary PWM throttle mode, Oneshot125, Oneshot42 and Multshot ultra high speed throttle signal, but also the latest dshot 150, 300, 600 digital throttle for anti interference and quick response. Input and output lines using soft silicone wire, very durable, and high temperature resistance, easy to weld.Specification:Item Type: 4 in 1 45A ESCWeight: Approx.46g / 1.6ozMaterial: Electronic ComponentsColor: BlackESC Size: Approx.44 x 43mm / 1.73 x 1.69inFixed Hole: Approx.20 x 20mm / 0.8 x 0.8in, Approx.30.5 x 30.5mm / 1.2 x 1.2inFixed Aperture: M4Working Voltage: 2-6sMaximum Continuous Operating Current: 45AMaximum Instantaneous Current: 50ASupport: DSHOT150, 300, 600, PWM, Oneshot125, Oneshot42 And MultshotSoftware: BLHeliSuiteFirmware Version: BL16.7Application: Fit For Unmanned RC Drone And For FPV Traversing Machine, Etc.Package List:1 x ESC3 x Wiring 1 x Capacitance 1 x Plug 8 x Rubber Mat 1 x Wiring Diagram
  • Fruugo ID: 416449436-878758708
  • EAN: 7540131328268

Tuoteturvallisuustiedot

Katso tätä tuotetta koskevat tuoteturvallisuustiedot alla

Seuraavat tiedot tarjoaa tätä tuotetta myyvä riippumaton kolmas osapuoli.

Tuoteturvallisuustarrat

CE Mark
Turvallisuusvaroitukset: Warning: Please read the product instructions carefully before use to ensure correct use.
Sarjanumero: 7540131328268

Toimitus ja palautukset

Lähetetään 2 päivän kuluessa

  • STANDARD: ILMAINEN - Toimitus välillä ma 17 marraskuuta 2025–ma 24 marraskuuta 2025 - ILMAINEN

Lähetyspaikka: Kiina.

Teemme parhaamme varmistaaksemme, että kaikki tilaamasi tuotteet toimitetaan sinulle toiveidesi mukaisesti. Jos sinulle toimitettu tilaus kuitenkin on puutteellinen tai sisältää tilaamattomia tuotteita, tai jos et jostain muusta syystä ole tyytyväinen tilaukseesi, voit palauttaa tilauksen kokonaan tai osittain. Saat tuotteista täyden hyvityksen. Näytä koko palautuskäytäntö

Tuotteen vaatimustenmukaisuustiedot

Katso tätä tuotetta koskevat yhteensopivuustiedot alla.

Seuraavat tiedot tarjoaa tätä tuotetta myyvä riippumaton kolmas osapuoli.

Valmistaja:
Alla oleva informaatio sisältää Fruugossa myytävän tuotteen valmistajan yhteystiedot.

  • Wuhan Pinsheng Technology Co., Ltd.
  • Wuhan Pinsheng Technology Co., Ltd.
  • No.A357,Shoulder-to-shoulder?Incubator,Building?4
  • Wuchang District
  • Wuhan
  • CN
  • 430000
  • pinsenkj@163.com
  • 18062524796
  • https://shop01473o1711614.1688.com/page/creditdetail.htm?spm=a261y.7663282.shopNavigation.1.6310755czE9SFQ

Vastuuhenkilö EU:ssa:
Alla oleva informaatio sisältää EU:n alueen vastuuhenkilön yhteystiedot. Vastuuhenkilö on EU:n alueella sijaitseva nimetty talouden toimija, joka on vastuussa asianomaisen EU:n alueelle myytävän tuotteen vaatimustenmukaisuudesta.

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795