Features The Normally Switch: The switch is the usual switch, which can only be connected only when the temperature standard is reached, otherwise it is disconnecting the connection and requires temperature requirements. High -insulation Resistance: The temperature control switch has high insulation resistance, and has more than 50mohm in the ambient temperature and water, which has stable characteristics. Temperature Control: The contacts of the constant temperature control switch can withstand 220VAC 1.5A or 24VDC 1.5A voltage. Note that this voltage is required, otherwise it will be damaged and cannot be used. Practical: Normally the temperature control switch has high reliability and durability, long life, and rarely interference in radio. Suitable for power supply, testing equipment, refrigeration, air conditioning, printing circuit board. High Accuracy: The control switch is made strictly in accordance with standards, with reliability and high accuracy, small size, and light weight. Specification: Item Type:Switch Type :Normally Opened Contact Load:220VAC 1.5A or 24VDC 1.5A Insulation Resistance: Normal Temperature And Humidity ≥50MΩ Temperature:40℃ / 45℃ / 50℃ / 55℃ / 60℃ / 65℃ / 70℃ / 75℃ / 80℃ / 85℃ / 90℃ / 95℃ / 100℃ / 105℃ / 110℃ / 115℃ / 120℃ / 125℃ / 130℃(Optional) Contact Resistance: ≤ 100 MΩ Electric Strength: ≥500VAC Package List: 1 x Switch Note: 1. When using contact temperature sensing, the metal cover should be close to the mounting surface of the controlled appliance. To ensure the temperature sensing effect, the temperature sensitive surface should be coated with thermal grease or other similar heat transfer medium. 2. Do not crush, loosen or deform the top of the cover during installation to avoid affecting performance. 3, can not let the liquid penetrate into the temperature controller, do not crack the shell, do not arbitrarily change the shape of the external terminal. 4. The product should be used in a circuit with a current of no more than 5A. The copper core should be selected from 0. 5-1mm2 wire connection; if the circuit is not more than 10A, the copper core should be 0.75-1.5mm2. connection. 5. The product should be stored in a warehouse with a relative humidity of less than 90% and an ambient temperature of 40 ° C below, which is ventilated, clean, dry and free of corrosive gases. Package List 1 x Switch