32 levels-65536 levels of gray control, software gamma correction processing. Support points, lines, areas, rules and shaped handles. Single port output can support 2048 pixels. Multiple controllers can be cascaded together and work synchronously Compatible with single-wire or two-wire chips. Memory card Type: SD card Capacity: 128MB-32GB Physical parameters: Weight: 0.2kg Temperature: -40-85 degrees Voltage gate: DC5V / DC7.5-24V Features: K1000C controller Power: 3W Remarks: 1. K-1000-RGBW should be for lamps with RGBW four channels. 2. For a single-channel lamp with a load, K-1000-W needs to be . At this time, a channel represents a pixel, and the software effect is white. Precautions: 1. Before copying the file to the SD card, the SD card must be formatted first. Note that it must be formatted before each copy. 2. The SD card must be formatted into "FAT" format or "FAT32" format. 3. The SD card cannot be hot swapped, that is, every time the SD card is plugged and unplugged, the controller must be disconnected from the power supply. size:159*89*24mm Material:metal colour:White Package Contents: 1 * K-1000C Pixel Program Controller 1 * 256M memory card Only the above package content, other products are not included. Note: Light and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement.