This is a great set of easy-reassembling LCD controller kit which is used to turn a bare LCD panel Notebook LCD screen into a desktop/PC monitor. It will be a surprise that your bare LCD will be of good use, and no longer be a waste. Or it is a very insteresting things that we make a monitor successfully by ourselves. Giving your lcd a new life with your fantastic idea. HD set-top box, computer / host, //, game machine,Mobile phone,raspberry pie and TYPE-C signal interface. the uav can do displays, industrial displays, personal display, monitors, and other needs to be displayed. This driver board is a FHD display driver board, EDP output interface, the maximum resolution is1920 * 1200 @ 60 hz. The driver board uses the main control IC, RTD2556 the driver board supports USB-5V voltage input, can use mobile phone charger, charging bank, computer USB interface as a power supply, 13.5 Earphone holder for audio output Support for signal input and use MINIHDMI seat for HDMI1.4 The thickness of the driving board is controlled to 5MM Potentiometer using wave wheel key, three-in-one function, menu, plus, minus, and compound brightness and volume Earphone holder for audio output, you can use ordinary 3.5 earphones or connect external power amplifier devices the touch seat is defined as 1.25-4P Upgrading Using an Port power amplifier output dual channel, spacing 1.25-4P definition The LCD interface is the EDP30PIN interface. The output interface needs to be confirmed through the software upgrade Compatible with 30 pin EDP interface LCD screen resolution is 1366x768 LCD Colour:blue Material:PC+metal Package Contents: 1 x Driver board 1 x EDP cable Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.