Laminator Machine A4 to 3 Inch 320mm/min Cold Thermal Paper Card Lamination Machine with Paper Cutter EU Plug AC220V-240V

79,00 €
ja 15,49 € toimitus

Laminator Machine A4 to 3 Inch 320mm/min Cold Thermal Paper Card Lamination Machine with Paper Cutter EU Plug AC220V-240V

  • Merkki: Unbranded
Myynyt:

Laminator Machine A4 to 3 Inch 320mm/min Cold Thermal Paper Card Lamination Machine with Paper Cutter EU Plug AC220V-240V

  • Merkki: Unbranded

79,00 €

Tallenna 35,00 € (30%)

ovh.

114,00 €
Varastossa
ja 15,49 € toimitus

14 päivän palautuskäytäntö

Myynyt:

79,00 €

Tallenna 35,00 € (30%)

ovh.

114,00 €
Varastossa
ja 15,49 € toimitus

14 päivän palautuskäytäntö

Maksutavat:

Kuvaus

Laminator Machine A4 to 3 Inch 320mm/min Cold Thermal Paper Card Lamination Machine with Paper Cutter EU Plug AC220V-240V

Laminator Machine A4 to 3 Inch 320mm/min Cold Thermal Paper Card Lamination Machine with Paper Cutter EU Plug AC220V-240V Item Type: Laminator Machine Material: ABS Model: FN336 Power Consumption: 300W Film Rewind: Push the ABS toggle key to remove the film. Laminating Size: A4 to 3 Inch Heating Method: Quartz Heating Wire Laminating Width: Approx. 230mm / 9.06in (A4) Laminating Thickness: Approx. 0.1-0.5mm / 0.004-0.02in Preheating Time: 1-2min Temperature Range: 115℃-145℃ Lamination Speed: 320mm/min Noise Level: ≤55db How e: Non stick paper, foggy white pieces. 1. Not complete the preheating, the temperature is not enough, wait for the over-molding machine to complete the preheating (green light) and then used 2. Thickness gear is not correct, select a higher gear, warming ready to be molded again. No working or heating of the overmolding machine. 1. The power supply is not suitable, please check the power supply specification before powering on the over molding machine. 2. The switch is not set to on or hot mode, set the switch to on or hot mode. Bubbles, wrinkles, bent photos 1. Incorrect thickness gear, select a lower gear, cool down the temperature and get ready before molding. 2. The rubber rollers of the plasticizer are not flat and there are debris, check the rubber rollers and clean them. 3. Plasticized objects are not placed on the level, there are debris, plasticizing before removing debris, put the objects on the level and then plasticized! What should I do if there is a paper jam in the plasticizer? 1. Not correctly feed the paper, the rubber rollers on the foreign body, switch off and hold down the ABS key for the film, clean the rubber rollers Smoke over the plastic machine. 1. Normal vulcanization of the new machine imagined, a normal phenomenon of the new machine, more than a few times will disappear! 2. Power supply voltage does not match (burnt flavor), plastic machine before powering up, please check the power supply specifications before powering up.
  • Fruugo ID: 371686866-805255241
  • EAN: 9311295886806

Toimitus ja palautukset

Lähetetään 24 tunnin kuluessa

  • STANDARD: 15,49 € - Toimitus välillä ti 06 tammikuuta 2026–ke 14 tammikuuta 2026

Lähetyspaikka: Kiina.

Teemme parhaamme varmistaaksemme, että kaikki tilaamasi tuotteet toimitetaan sinulle toiveidesi mukaisesti. Jos sinulle toimitettu tilaus kuitenkin on puutteellinen tai sisältää tilaamattomia tuotteita, tai jos et jostain muusta syystä ole tyytyväinen tilaukseesi, voit palauttaa tilauksen kokonaan tai osittain. Saat tuotteista täyden hyvityksen. Näytä koko palautuskäytäntö

Tuotteen vaatimustenmukaisuustiedot

Katso tätä tuotetta koskevat yhteensopivuustiedot alla.

Seuraavat tiedot tarjoaa tätä tuotetta myyvä riippumaton kolmas osapuoli.

Valmistaja:
Alla oleva informaatio sisältää Fruugossa myytävän tuotteen valmistajan yhteystiedot.

  • Guangzhoushiyiangongchuangwangluojishu Co.Ltd
  • Guangzhoushiyiangongchuangwangluojishu Co.Ltd
  • Room 201, Area B, No. 280, Zhongshan Avenue East
  • Huangpu District,Guangzhou City, Guangdong Provin
  • China
  • Guangzhou
  • CN
  • 511363
  • firzen.pan@gmail.com
  • 861912865631

Vastuuhenkilö EU:ssa:
Alla oleva informaatio sisältää EU:n alueen vastuuhenkilön yhteystiedot. Vastuuhenkilö on EU:n alueella sijaitseva nimetty talouden toimija, joka on vastuussa asianomaisen EU:n alueelle myytävän tuotteen vaatimustenmukaisuudesta.

  • SUCCESS COURIER SL
  • SUCCESS COURIER SL
  • CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3
  • Fuenlabrada , Madrid
  • Spain
  • Madrid
  • ES
  • 28947
  • successservice2@hotmail.com
  • 34910602659