Thermal Conductive Silicone Adhesive Grease Paste Glue Rubber For CPU 2025

10,95 €
ja 7,99 € toimitus

Thermal Conductive Silicone Adhesive Grease Paste Glue Rubber For CPU 2025

  • Merkki: Unbranded
Myynyt:

Thermal Conductive Silicone Adhesive Grease Paste Glue Rubber For CPU 2025

  • Merkki: Unbranded
Ohjevähittäishinta: 20,95 €
Hinta: 10,95 €
Säästät: 10,00 € (47%)
Myynyt:
10,95 €
ja 7,99 € toimitus

Varastossa

Hyväksymme seuraavat maksutavat

Kuvaus

brand new and high quality Features: White thixotropic elastomer.Good cold and hot tolerance.No peeling and good disassemble after long for time usage. Excellent in cold and high alternating resistance.It has great adhesion,insulation and dissipation. You can use it to get more reliable filling heat,simpler process and more economic cost. It is mainly used in range of fill, bond, and seal in electronics,the for gap between CPU and radiators,the filling of high-power electronics modules and radiators,etc. Thermal Conductive Silicone only, other accessories demo in the picture is not included! Specification: Temperature: -60~280 degrees Material: Silicone Rubber Dimensions: 13.2x3.9cm/5.2x1.54inch Capacity: 80g Color: White Quantity: 1 Pc Note: 1.Please allow 0-1cm error due to manual measurement. pls make sure you do not mind before you bid. 2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! Package includes: 1 x Thermal Conductive Silicone How To Use: Preparation:Clean the un-bonded or uncoated surfaces by removing the rust, ash, and oil, etc. Application:Pierce the opening with the tip of the cap. Fix the nozzle, and coat the clean surface evenly with the adhesives, then bond the two surfaces. Curing Condition:The curing progress is from outer surface into inner surface.The elastomer get cure with the depth of 2~4mm in 24 hours (at room temperature, 55% moisture). if the bonded parts is too deep (especially the parts not easy to contact with air) or the temperature is too low, the full curing for time will be extend. Advise user preparing enough for time to let elastomer get full cure in order to keep the properties stably. Tips:After the application,screw its nozzle tightly and store in dry and cool place for next for time using.There may be some cured gel around the opening when you use it again,just remove the cured,and use the uncured. Note: Due to the light and screen setting difference, the item's color may be slightly different from the pictures. Please allow slight dimension difference due to different manual measurement. Sold by-Minnanxin
  • Fruugo ID: 409564215-867314257
  • EAN: 6092010843665

Tuoteturvallisuustiedot

Katso tätä tuotetta koskevat tuoteturvallisuustiedot alla

Seuraavat tiedot tarjoaa tätä tuotetta myyvä riippumaton kolmas osapuoli.

Tuoteturvallisuustarrat

CE Mark
Turvallisuusvaroitukset: Not suitable for children under 36 months
Ainesosat: Plastic 5%

Toimitus ja palautukset

Lähetetään 24 tunnin kuluessa

  • STANDARD: 7,99 € - Toimitus välillä ke 22 lokakuuta 2025–to 30 lokakuuta 2025

Lähetyspaikka: Kiina.

Teemme parhaamme varmistaaksemme, että kaikki tilaamasi tuotteet toimitetaan sinulle toiveidesi mukaisesti. Jos sinulle toimitettu tilaus kuitenkin on puutteellinen tai sisältää tilaamattomia tuotteita, tai jos et jostain muusta syystä ole tyytyväinen tilaukseesi, voit palauttaa tilauksen kokonaan tai osittain. Saat tuotteista täyden hyvityksen. Näytä koko palautuskäytäntö

Tuotteen vaatimustenmukaisuustiedot

Katso tätä tuotetta koskevat yhteensopivuustiedot alla.

Seuraavat tiedot tarjoaa tätä tuotetta myyvä riippumaton kolmas osapuoli.

Valmistaja:
Alla oleva informaatio sisältää Fruugossa myytävän tuotteen valmistajan yhteystiedot.

  • Minnanxin 03
  • Putian Minnanxin Trading Co., Ltd.
  • Room 2402, Building 11, Area B, Oushi Lingxiu, No. 333 Huaxiu Road
  • Longqiao Subdistrict, Chengxiang District
  • Putian
  • CN
  • 351100
  • nanxinmin01@outlook.com
  • 8615260999837

Vastuuhenkilö EU:ssa:
Alla oleva informaatio sisältää EU:n alueen vastuuhenkilön yhteystiedot. Vastuuhenkilö on EU:n alueella sijaitseva nimetty talouden toimija, joka on vastuussa asianomaisen EU:n alueelle myytävän tuotteen vaatimustenmukaisuudesta.

  • IBERTRUST GLOBAL SOCIEDAD LIMITADA
  • IBERTRUST GLOBAL SOCIEDAD LIMITADA
  • C/ PABLO IGLESIAS 1A ENTRES
  • Castellon De La Plana
  • ES
  • 12001
  • contact@ibertrust.info
  • 0034 964818867