Display 0.96/1.3/1.44/1.77/1.8/2.4/2.8 inch IPS 7P SPI HD 65K TFT Full Color LCD Module ST7735 Drive IC 80*160 For Arduino SIZE 0.96inch  Display Mode Normally black IPS Display Format Graphic 80RGB*160 Dot-matrix Input Data SPI interface Drive IC ST7735S Dimensional outline 24(W)*30 (H)*2.8+/-0.1(T)mm Resolution 80RGB*160 Dots LCD Active area 10.8 (W)*21.7 (H) Dot pitch 0.135(H) x 0.1356(V) mm Viewing Direction All View Operating Temperature -20～70°C 2.Pin Descriptions: PIN No Symbol Description 1 GND Ground 2 VCC Power 3.3V 3 SCL Serial clock pin. 4 SDA Serial data input 5 RES LCM Reset pin This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin pull high during normal operation. 6 DC Data/Command Control 7 CS Chip Select 8 BLK Backlight control pin    1.3 inch 1.Features Display Mode Normally black IPS Display Format Graphic 240RGB*240 Dot-matrix Input Data SPI interface Drive IC ST7789VW Dimensional outline 27.78(W)*39.22 (H)*3.0+/-0.1(T)mm Resolution 240RGB*240 Dots LCD Active area 23.4 (W)*23.4 (H) Dot pitch 0.0975(H) x 0.0975(V) mm Viewing Direction All View Operating Temperature -20～70°C   2.Pin Descriptions: PIN No Symbol Description 1 GND Ground 2 VCC Power 3.3V 3 SCL Serial clock pin. 4 SDA Serial data input 5 RES LCM Reset pin This pin is reset signal input. When the pin is low, initialization of the chip is executed. Keep this pin pull high during normal operation. 6 DC Data/Command Control 7 BLK Backlight control pin