OBDII Key Programmer, Professional High Accuracy Remote Key Programming Device for H and G Chips

26,95 €
ILMAINEN toimitus

OBDII Key Programmer, Professional High Accuracy Remote Key Programming Device for H and G Chips

  • Merkki: Unbranded
Myynyt:

OBDII Key Programmer, Professional High Accuracy Remote Key Programming Device for H and G Chips

  • Merkki: Unbranded
Ohjevähittäishinta: 34,95 €
Hinta: 26,95 €
Säästät: 8,00 € (22%)
Myynyt:
26,95 €
ILMAINEN toimitus

Varastossa

Hyväksymme seuraavat maksutavat

Kuvaus

Feature: 1. Fitment: OBD2 remote key programmer applies to 4D67, 68, 72(G), support both G and H chip, test on replacement for Camry 2015. 2. Add Remote Control and Transponder: The key programming device has powerful functions, allowing you to add transponder and remote control, practical to use. 3. Small and Portable: Key maker is easy to carry and use, does not take up space, will not take up too much of your time, very convenient. 4. Reliable and Safe: The key programmer is safe to use, no danger, stable performance, high in reliability, and can be used with confidence. 5. Durable ABS: Using safe ABS material, transponder programmer is not easy to break, impact resistant, and no damage to your car. Specification: Item Type: OBDII Key Programmer Material: ABS Description: Apply to 4D67, 68, 72(G), support both G and H chip, test on replacement for Camry 2015 Add Remote Control Get in the car and close the door, insert the key and turn the key on, insert the device into OBD. After the sound(Dee-), it will start to add the remote control. After the sound ( Dee- Dee-), open the door, when hear the sound blaring. Press lock and unlock key at the same time. And press the lock key. If the blaring end, It’s OK. Note: Switch is on the right (add remote control). Add Transponder: Get in the car and close the door, insert the main key into the lock and turn the key on, and then insert the device into the OBD. If it will sound twice, it will start to add transponder. After the sound (Dee-Dee-), 2-3 minutes later, anti theft light is on. And then remove the key( anti theft light will flash), insert the new key and doesn’t need turn the key, anti theft light will be off later. Note: Switch is on the left.( add transponder). Package List: 1 x OBDII Key Programmer
  • Fruugo ID: 412827334-872766967
  • EAN: 7603816585315

Tuoteturvallisuustiedot

Katso tätä tuotetta koskevat tuoteturvallisuustiedot alla

Seuraavat tiedot tarjoaa tätä tuotetta myyvä riippumaton kolmas osapuoli.

Tuoteturvallisuustarrat

CE Mark
Turvallisuusvaroitukset: Warning: Please read the product instructions carefully before use to ensure correct use.
Sarjanumero: 7603816585315

Toimitus ja palautukset

Lähetetään 2 päivän kuluessa

  • STANDARD: ILMAINEN - Toimitus välillä pe 24 lokakuuta 2025–pe 31 lokakuuta 2025 - ILMAINEN

Lähetyspaikka: Kiina.

Teemme parhaamme varmistaaksemme, että kaikki tilaamasi tuotteet toimitetaan sinulle toiveidesi mukaisesti. Jos sinulle toimitettu tilaus kuitenkin on puutteellinen tai sisältää tilaamattomia tuotteita, tai jos et jostain muusta syystä ole tyytyväinen tilaukseesi, voit palauttaa tilauksen kokonaan tai osittain. Saat tuotteista täyden hyvityksen. Näytä koko palautuskäytäntö

Tuotteen vaatimustenmukaisuustiedot

Katso tätä tuotetta koskevat yhteensopivuustiedot alla.

Seuraavat tiedot tarjoaa tätä tuotetta myyvä riippumaton kolmas osapuoli.

Valmistaja:
Alla oleva informaatio sisältää Fruugossa myytävän tuotteen valmistajan yhteystiedot.

  • Wuhan Jinxingkai Network Technology Co., Ltd.
  • Wuhan Jinxingkai Network Technology Co., Ltd.
  • No. 1-1, Door 57
  • Shihua Village
  • Qingshan District
  • Wuhan
  • CN
  • 430000
  • goldxinks@163.com
  • 0086 17786498762
  • https://shop01473o1711614.1688.com/page/creditdetail.htm?spm=a261y.7663282.shopNavigation.1.6310755czE9SFQ

Vastuuhenkilö EU:ssa:
Alla oleva informaatio sisältää EU:n alueen vastuuhenkilön yhteystiedot. Vastuuhenkilö on EU:n alueella sijaitseva nimetty talouden toimija, joka on vastuussa asianomaisen EU:n alueelle myytävän tuotteen vaatimustenmukaisuudesta.

  • None
  • Kequ Technology s.r.o.
  • Pražákova 1008/69
  • Štýřice
  • Jihomoravský kraj
  • Brno
  • CZ
  • 63900
  • christopher25106@outlook.com
  • 420608214795