Peer-to-peer Wireless Transmission Co-Locator Laptop Monitor Wireless Connection Features: The Compatible-HDMI Wireless Transmitter uses the standard 802.11AC protocol to transmit HD audio and video signals via 5G WiFi, enabling the transfer of HD video from DVDs, players, PCs and other devices via WiFi for one-to-one applications. The device has excellent image processing and transmission capabilities for smooth and stable signal transmission. Key features: 1. long distance transmission of Compatible-HDMI video and audio signals over WiFi, up to 50 metres; 2. compatibility with HDMI 1.4, 1.3 standards; 3. the ability to automatically recognise and configure various display modes 4. built-in automatic equalisation system for a smooth, clear and stable picture; 5. Receiving/transmitting HDMI interface, no software, no setup, no driver, just connect and cast the screen; Installation steps: Receiver + transmitter combination, plug and play 1. Connect the HD port of the receiver to the video input port of a display device such as a monitor or TV. 2. Plug the receiver into the power adapter or USB power supply port (voltage 5V and current 2A). 3.Adjust the HD signal source of the monitor or TV to the corresponding HD port until the receiver power-on screen shows that the power-on is successful. 4. The transmitter will be connected to the computer or other devices with HD function video output function. Wait for ten seconds or so after the indicator light enters the fast flashing state to complete the projection. Specifications: Support protocol: Compatible-HDMI 1.4 Maximum supported resolution: 1920x1080@60 Hz Interface: Compatible-HDMI -A interface Impedance: 100 Ω Output: Compatible-HDMI (simultaneous audio and video output) Encoding format: H.264 Function: Enables wireless screen casting from laptops and tablets on LCD monitors, projectors, touch panels, LED splicing screens and other display devices. WIFI protocol: 2.4G+5G standard 802.11 a/b/g/n/ac Transmission distance: up to 50 m in the open environment Power supply USB power supply: 5 V/2A Maximum power consumption: MAX 3W Operating temperature/humidity: 0°C ~ 50°C/10% ~ 80% RH (non-condensing) Transmitter Number of interfaces:1 Interface: HDMI Resolution:1080P Receiver Running memory:1G Storage space:1G Receiving:Built-in antenna Interface:HDMI Resolution: 1920*1080, 1280*720(60P), 1280×960 , 1280*800, 1280*720(50P), 1024*768 Frame rate: 30~60 fps Latency: 80-100ms (open environment) Package included: 1 * Peer-to-peer co-screener