Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90R )

97,85 €
ILMAINEN toimitus

Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90R )

  • Merkki: Unbranded
Myynyt:

Rotary Clamping Cylinder Corner Press Rotation Swing Pneumatic Components(ACK63‑90R )

  • Merkki: Unbranded

97,85 €

Tallenna 29,36 € (23%)

ovh.

127,21 €
Varastossa
ILMAINEN toimitus
Myynyt:

97,85 €

Tallenna 29,36 € (23%)

ovh.

127,21 €
Varastossa
ILMAINEN toimitus

Hyväksymme seuraavat maksutavat

Kuvaus

Feature:1. This is a doubleacting rotary clamping corner press cylinder with an inner diameter of 63mm and the maximum working pressure reaches 1.0MPa the maximum operating speed can reach 200mm/s.2. The cylinder block is made of aluminum alloy, with high density and high strength, supporting long time and high load work.3. The inner wall of the cylinder mirror process, the surface is hard oxidized to extend the service life of the cylinder.4. The hard protective layer is resistant to wear and corrosion and can be used in harsh working environments.5. The cylinder is small in size and has simple structrue, you can carry it easily and install it in a few minutes.Specification:Condition: 100% Brand New Item Type: CylinderMaterial: Aluminum AlloyColor: As Pictures ShownOptional Type: ACK63-90R, ACK63-90L Inner Diameter: Approx. 63mm / 2.5inPiston Rod Outer Diameter: Approx. 20mm / 0.8inAction Type: Double ActionWorking Medium: Air (filtered by a Filter Screen Above 40m)Operating Pressure Range: Approx. 0.15-1.0MPa (22-145psi)Guaranteed Pressure Resistance: 1.5MPa (215psi)Working Temperature (): -20-80Operating Speed Range: Approx. 50-200mm/s 2-7.9in/sTravel Tolerance Range: 1.0Rotation Angle Tolerance Range: Approx. 1.5Buffer Type: NoneTake over Caliber: PT1/8Installation and Use1. When the cylinder clamps the workpiece, it must be performed within the clamping stroke, and the clamping operation cannot be performed within the rotation stroke.2. The clamping plane must be perpendicular to the cylinder axis. After the workpiece is clamped, please do not move the workpiece.3. Before piping the cylinder, the debris in the pipe must be removed to prevent debris from entering the cylinder.4. The medium used in the cylinder should be filtered by a filter element above 40m before use.5. When the cylinder is removed and not used for a long time, pay attention to rust prevention on the surface, add dust blocking caps to the intake and exhaust ports, and apply rust prevention oil to the end of the piston rod..Package List:1 x Cylinder
  • Fruugo ID: 426857360-896044216
  • EAN: 7708428301527

Tuoteturvallisuustiedot

Katso tätä tuotetta koskevat tuoteturvallisuustiedot alla

Seuraavat tiedot tarjoaa tätä tuotetta myyvä riippumaton kolmas osapuoli.

Tuoteturvallisuustarrat

CE Mark
Turvallisuusvaroitukset: Warning: Please read the product instructions carefully before use to ensure correct use.
Sarjanumero: 7708428301527

Toimitus ja palautukset

Lähetetään 2 päivän kuluessa

  • STANDARD: ILMAINEN - Toimitus välillä to 06 marraskuuta 2025–to 13 marraskuuta 2025 - ILMAINEN

Lähetyspaikka: Kiina.

Teemme parhaamme varmistaaksemme, että kaikki tilaamasi tuotteet toimitetaan sinulle toiveidesi mukaisesti. Jos sinulle toimitettu tilaus kuitenkin on puutteellinen tai sisältää tilaamattomia tuotteita, tai jos et jostain muusta syystä ole tyytyväinen tilaukseesi, voit palauttaa tilauksen kokonaan tai osittain. Saat tuotteista täyden hyvityksen. Näytä koko palautuskäytäntö