RP2350-LCD-0.96 is a low-cost, high-performance -like MCU board with flexible digital interfaces. It incorporates for 's RP2350A microcontroller chip, the same as on for 2. Adopts unique dual-core and dual-architecture design: dual-core Arm -M33 processor and dual-core Hazard 3 RISC-V processor, flexible clock running up to 150 MHz. 520KB of , and 4MB of on-board Flash memory. USB-C connector, keeps it up to date, easier to use. 0.96inch 160x80 pixels 65K colorful IPS LCD display. Lithium battery recharge/discharge header, suitable for mobile devices. Onboard DC-DC chip MP28164, high efficiency DC-DC buck-boost chip, maximum 2A load current. Castellated module allows soldering directly to carrier boards. USB 1.1 with device and host support. Low-power sleep and dormant modes. Drag-and-drop programming using mass storage over USB. 26 x multi-function GPIO pins. 2 x SPI, 2 x I2C, 2 x UART, 4 x 12-bit ADC, 16 x controllable PWM channels. Accurate clock and on-chip. Temperature sensor. Accelerated floating-point libraries on-chip. 12 x Programmable I/O (PIO) state machines for custom peripheral support. Note:Due to different production batches, there are differences in printing/appearance, which does not affect the use. Type:No Solder Colour:Blue Material:PCB Package Contents: 1 * Development Board Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.