1. The sinusoidal waveform control ensures greater stability compared to traditional ESCs and reduces the risk of component failure. 2. The single-driver design uses high-quality chips and electronic components to deliver reliable and consistent performance. 3. The robust motherboard construction enhances durability and extends service life. 4. High torque output at low speeds. 5. Two-way communication allows real-time battery status monitoring via the remote control. Built-in safety protections include low-voltage warning, under-voltage protection, and automatic power-off. Functions: 1. Four-speed settings: 1 – Low speed, 2 – Medium speed, 3 – High speed, 4 – Sport mode. 2. Electronic braking system (regenerative braking active during downhill coasting; maximum brake current: 10 A). 3. One-button forward/reverse toggle. 4. Wireless 2.4 GHz remote control with 20 selectable channels and automatic frequency-hopping anti-interference technology. 5. Maximum controller current: 40 A. 6. Controller features: high torque at low speeds. Remote Control Pairing Instructions: Power on the main unit. Press and hold the pairing button on the motherboard (located next to the buzzer) or hold the remote’s power button for 10 seconds. When the red LED flashes, the unit enters pairing mode. Press the “Hide” button on the remote (located next to the power switch). When both the motherboard and remote LEDs flash simultaneously, pairing is successful. Standby Mode: Automatically enters low-power standby after 10 minutes of inactivity. Standby power consumption is negligible. Material: Composite Color: As shown Package Contents: 1 × Motherboard 1 × Motor cable 1 × Power supply cable 1 × Remote control 1 × USB cable Note: The actual product color may vary slightly due to lighting conditions and screen settings. Measurement tolerance: ±1–3 cm.