1,Effective Solution: This POE-World device provides an effective solution that can power Raspberry Pi 3B+ or 4 through a 328-foot network cable. 2,Suitable Cable: This device allows the use of 802.3af or passive injectors and switches using CAT5e, CAT6 or CAT7 Ethernet network cables to supply power on 10/100/1000 networks. 3,Connector Pins: This POE to 5V converter allows you to operate the Pi at a distance of 328 ft or 100 meters from the power supply. The size is very suitable Pi shells-especially CanaKit Premium shells. The connector pins can be used GPIO and serial use. 4,Large Radiator: There is room a large radiator, and the output power is fully adjustable and stable, which is much less noise than the Raspberry Pi hat. 5,Designed Function: Designed or similar POE switches. This active POE solution negotiates with the switch to activate power and provide it to the Pi. This is a compact and cost-effective power solution. Specifications: Name: Power Supply Module Power and data source input: Pi 3 B and or RJ 45 female connector on Pi 4 Data to the powered device: all 4 pairs of valid data are 10/100/1000 802.3af category: level 3-up to 12.95 watts Input voltage range: 44 to 57 volts (active POE) Input current at 48v: 265 ma input can output 2 A Maximum output voltage load (5v10w): 2v 10Wh 5v +-2% Working temperature: 0 Celsius~50 Celsius Colour:green Material:abs Size:about 6 x 4cm Package Contents: 1 * POE Green Module Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.