Tang Primer 25K FPGA Development Board GOWIN GW5A RISCV Development Board 23K LUT4 PMOD Core

31,95 €
ja 9,49 € toimitus

Tang Primer 25K FPGA Development Board GOWIN GW5A RISCV Development Board 23K LUT4 PMOD Core

  • Merkki: Unbranded

Tang Primer 25K FPGA Development Board GOWIN GW5A RISCV Development Board 23K LUT4 PMOD Core

  • Merkki: Unbranded
Ohjevähittäishinta: 84,00 €
Hinta: 31,95 €
Säästät: 52,05 € (61%)
Myynyt:
31,95 €
ja 9,49 € toimitus

Varastossa

Hyväksymme seuraavat maksutavat

Kuvaus

Tang Primer 25K is a core board with a very small package (23x18mm) designed based on GW5A-LV25MG121, and is equipped with a 25K Dock baseboard with full pin lead-out (except MIPI high-speed pins). Tang Primer 25K core board is a compact and highly integrated FPGA core board. It integrates Gaoyun GW5A-LV25MG121, 64Mbit SPI FLASH, DC-DC power supply and BTB connector in an area smaller than a one-yuan coin. The core board leads out 76 GPIOs, 1 hard-core 4lane MIPI line and 3 power outputs for users to use. Users only need to provide a 5V power supply to the core board and correctly set the configuration pins to easily use the Tang Primer 25K core board. Tang Primer 25K Dock baseboard is a of modular baseboard, equipped with an easy-to-use USB-JTAG debugger, 3 PMOD interfaces and 1 40P pin header interface. Users can use the PMOD interface to connect simple modules such as modules, handle modules, and LED modules. In addition, users can also use the 40P pin header interface to connect SDRAM modules, dual camera modules and other modules with more complex functions. Compared with the common FPGA development environment on the market, the IDE installation package required by Tang Primer 25K is less than 200MB in size; the space occupied after installation is close to 500MB, which greatly saves hard disk space. The IDE usage process is extremely streamlined and beginners will not be overwhelmed by too many options. Compared with other IDEs on the market that program in five minutes and integrate in ten minutes, the IDE used by Tang Primer 25K can bring a pleasant experience of programming in five minutes and integrating in only ten seconds.<br><br>Kit Model:Tang Primer 25K Dock Main Chip:GW5A-LV25(22nm) LUT:23040 BIock RAM:1008kbit :27 x 36 PLLS:6 Clock source:50Mhz Active crystal oscillator SDRAM:Extend 40Pin module 512Mbit with 16bit width External Flash:64Mbit QSPI NOR PMOD:3 Pinout:1x40P (38 GPIO) Onboard Debugger:USB to JTAG & UART Due to different batches, the printed words on the product will be different, which does not affect use. Type:E:Tang-Primer-25K-Core Colour:Black Material:PCB<br><br>Package Contents: 1 * Core board<br><br>Only the above package content, other products are not included. Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.
  • Fruugo ID: 415325845-876848615
  • EAN: 8715946929835

Toimitus ja palautukset

Lähetetään 2 päivän kuluessa

  • STANDARD: 9,49 € - Toimitus välillä to 02 lokakuuta 2025–to 09 lokakuuta 2025

Lähetyspaikka: Kiina.

Teemme parhaamme varmistaaksemme, että kaikki tilaamasi tuotteet toimitetaan sinulle toiveidesi mukaisesti. Jos sinulle toimitettu tilaus kuitenkin on puutteellinen tai sisältää tilaamattomia tuotteita, tai jos et jostain muusta syystä ole tyytyväinen tilaukseesi, voit palauttaa tilauksen kokonaan tai osittain. Saat tuotteista täyden hyvityksen. Näytä koko palautuskäytäntö

Tuotteen vaatimustenmukaisuustiedot

Katso tätä tuotetta koskevat yhteensopivuustiedot alla.

Seuraavat tiedot tarjoaa tätä tuotetta myyvä riippumaton kolmas osapuoli.

Valmistaja:
Alla oleva informaatio sisältää Fruugossa myytävän tuotteen valmistajan yhteystiedot.

  • Coomnest
  • Shenzhen Chenyao Technology Co., Ltd.
  • Zhongxing Road, No. 105, Ruo Jun Building, 1301-3A
  • Shenzhen
  • CN
  • 518000
  • uewgst@outlook.com
  • 13728977443

Vastuuhenkilö EU:ssa:
Alla oleva informaatio sisältää EU:n alueen vastuuhenkilön yhteystiedot. Vastuuhenkilö on EU:n alueella sijaitseva nimetty talouden toimija, joka on vastuussa asianomaisen EU:n alueelle myytävän tuotteen vaatimustenmukaisuudesta.

  • Prolinx GmbH
  • Prolinx GmbH
  • Brehmstr.56,Duesseldorf,Germany
  • Duesseldorf
  • DE
  • 40225
  • eu@eulinx.eu
  • +49 2113105498