<p>X1202 is a UPS power management expansion board for 5. It has an ultra-compact design and retains the GPI0 interface, which can be stacked with other accessory boards.</p> <p>It can communicate through the 12C interface, measure parameters such as battery voltage, current, power and remaining power, and detect the working status of the module in real time.</p> <p>Onboard battery protection circuit, anti-overcharge, anti-over-discharge, anti-overcurrent, anti-short circuit and anti-reverse connection, support fast battery charging, stable and operation, 4 green LEDs indicate battery charging and discharging, support charging and discharging at the same time, uninterrupted power supply.</p> <p>Onboard switch button for controlling power on, safe shutdown, restart and forced shutdown, blue LED indicator shows power on, restart and shutdown status.</p> <p>Supports 4 18650 batteries, providing up to 10 hours of continuous operation (duration depends on battery type and application) equipped with XH2.54 connector and two USB sockets for 5V power output.</p> <p>Name:X1202 UPS power management expansion board</p> <p>Power supply interface:DC 5.5x2.1mm\/Type-C</p> <p>Power input:6-24Vdc \u00B15%, equal 3A\/5Vdc 5A</p> <p>UPS output:5.1V \u00B15% Max 5A</p> <p>Application range:for Raspberry Pi5 series motherboards</p> <p>Colour:Black</p> <p>Material:PCB</p> <p>Package Contents:</p> <p>1 * UPS Expansion Board Kit</p> <p>Only the above package content, other products are not included.</p> <p>Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +\/- 1-3cm.</p>