Product Introduction: The MKS CANable V2.0 module is an upgraded version of the MKS CANable V1.0. It is a compact, low-cost, open-source USB-to-CAN analyzer. The device appears as a virtual serial port on your computer and functions as a serial interface for CAN bus communication. CANable 2.0 supports standard CAN 2.0A, CAN 2.0B, and CAN FD protocols. With high-speed data transmission and stable performance, the MKS CANable V2.0 Pro module offers enhanced anti-interference capabilities, making it suitable for industrial diagnostics and motor control applications. When used with candleLight firmware, the device operates as a native CAN interface on Linux systems. The CANable analyzer is compatible with ARM-based embedded platforms such as Raspberry Pi, Raspberry Pi Zero, ODROID, and BeagleBone, enabling seamless integration into various projects. Product Features: 1. Supports CAN 2.0A and CAN 2.0B with baud rates up to 1 Mbps. 2. Compatible with candleLight and slcan firmware; slcan supports CAN-FD with test rates up to 2 Mbps or 5 Mbps. 3. Terminal resistor can be enabled or disabled using a jumper. 4. Equipped with a Type-C USB interface; supports online firmware updates and DFU mode upgrades. 5. Powered by a high-performance ARM Cortex-M4 STM32G431C8T6 processor with an operating frequency up to 170 MHz. 6. Schematic diagrams, firmware, source code, and host software are provided for complete and easy integration. Analyzer Board Version: V2.0 / V2.0 Pro Material: ABS Color: As shown in image Package Contents: 1 x USB data cable 1 x 3-pin double Dupont cable 1 x Analyzer board Note: The package includes only the items listed above. Other accessories are not included. Note: Lighting conditions and display settings may cause slight color variations between the product image and the actual item. Measurement tolerances are +/- 1-3 cm.