Function: 1. Non-contact NCV voltage detection, no close contact is required during measurement, making the measurement safer 2. Large LCD display, clear image, easy to read and record, maximum display 6000, equipped with backlight function, easy to use in dark environment 3. Automatic range operation is simple, supports manual and automatic free switching, meets the needs of different scenarios and improves work efficiency 4. Made of ABS, drop resistant, wear resistant and durable, the back of the protective case is equipped with pacifier compartment and hole protection design for hanging 5. Equipped with low battery reminder, automatically turns off after 15 minutes of inactivity, saving energy Specification: Item Type: Multimeter Model: VC99 Material: ABS Power supply: 2 x 1,5 V AAA (battery not included) Objective: Numerical electricity test Applicable fields: electronic laboratories, power equipment, electronic factories, car repairs, wireless communication enthusiasts, home appliance repairs Accuracy of the range of functions DCA 600mV/6V/60V/600V/1000V (0,5%and5) ACV 6V/60V/600V/750V (0.8%and10) DCA 600μA/6000μA/60mA/600mA/6A/20A (1,0%and5) ACA 600μA/6000μA/60mA/600mA/6A/20A (1,5%and10) Resistance 600Ω/6kΩ/60kΩ/600kΩ/6MΩ/60MΩ (0,8%and2) Capacity 60nF/600nF/6μF/60μuF/600μF/6mF/60mF (2,5%and5) Frequency 10Hz/100Hz/1kHz/10kHz/100kHz/1MHz/10MHz (0.5%and4) Temperature (℃) -40℃-1000℃ (0,8%and4) Temperature (℉) -40 ℉ -1832 ℉ (1,0% and 5) Special Feature VC99 NCV √ True effective value √ Illuminated display √ Diode/hFE measurement √ Analog bar √ Measurement of the work cycle √ Continuous alarm andlt;50Ω 10Ω Low battery indicator ＜ 2,4 V Data storage Maximum, Minimum Automatic shutdown After about 15 minutes of inactivity Functional protection √ Input resistance 10MΩ Sampling rate 3 times/sec Response frequency AC 40-400 Hz How Auto Range works Maximum display 6000 LCD Display Size 65 x 41 mm / 2,56 x 1,61 inch How to use: DC voltage measurement 1. Insert the black measuring cable into the COM socket and the red measuring cable into the VΩHz socket; 2. Turn the function switch into DC voltage position and select the DC measurement method za using the SELECT key; 3. The meter is in automatic range state at the beginning and the AUTO symbol is displayed, press RANGE key to switch to manual range mode, optional 600mV, 6V, 60V, 600V, 1000V range 4. Touch the measuring wire to the measuring point, and the voltage and polarity of the point connected to the red measuring wire will be displayed on the screen List of packages: 1 x Multimeter (battery not included) 2 x measuring cable 2 x Clip 1 x Thermal Contact 1 x Manual